Ross Tech faults
Ross Tech faults
Good evening,
So after letting my 06 GT sit for a few yrs (life happened) I started to sort out its issues. I will try to attach the print out from the software in hopes you all can start me in the right direction as I have googled and used up what little knowledge I have with this car. I will note the things I have done so that some these codes could be overlooked. I'M more so worried about the terminal 30 on these codes.
I just replaced my air compressor today and its still not kicking on. I hooked up my Autel PowerScan to it to shoot 12v while installed and it worked for 2 mins straight. Can didn't lift a cm. I replaced the relay and checked the 40amp and both 10 amp fuses.
I replaced the radio yrs ago so the no communication with the HVAC and audio is normal.
I fitted all of the inside, license plate, side mirrors and puddle lights with L.E.D’s.
My ABS pump was replaced so I'm guessing I have to do some type of learn process to have those codes go away. ( I need to get it to a shop so the breaks could be bled also).
Both batteries are on it's own CTEK trickle charger and despite the vacuum leak it starts up ok (Might need to put some type of gas treatment in there tho).
If for some reason the log.txt doesn't load then I'll try to get some screen captures and post them.
The bumper is off due to me needing to take the fender and headlight out to get to the ABS pump.
thanks for any and all help!!!
Side note: Has anyone heard from Adrenalinejunky as of late?
So after letting my 06 GT sit for a few yrs (life happened) I started to sort out its issues. I will try to attach the print out from the software in hopes you all can start me in the right direction as I have googled and used up what little knowledge I have with this car. I will note the things I have done so that some these codes could be overlooked. I'M more so worried about the terminal 30 on these codes.
I just replaced my air compressor today and its still not kicking on. I hooked up my Autel PowerScan to it to shoot 12v while installed and it worked for 2 mins straight. Can didn't lift a cm. I replaced the relay and checked the 40amp and both 10 amp fuses.
I replaced the radio yrs ago so the no communication with the HVAC and audio is normal.
I fitted all of the inside, license plate, side mirrors and puddle lights with L.E.D’s.
My ABS pump was replaced so I'm guessing I have to do some type of learn process to have those codes go away. ( I need to get it to a shop so the breaks could be bled also).
Both batteries are on it's own CTEK trickle charger and despite the vacuum leak it starts up ok (Might need to put some type of gas treatment in there tho).
If for some reason the log.txt doesn't load then I'll try to get some screen captures and post them.
The bumper is off due to me needing to take the fender and headlight out to get to the ABS pump.
thanks for any and all help!!!
Side note: Has anyone heard from Adrenalinejunky as of late?
Last edited by TeamJones1962; Yesterday at 09:07 PM.
@TeamJones1962 ,
I am having an issue opening your scan txt files, working on it.
As far as @Adrenalinjunkie , his last activity was July last year, hopefully he will see this tag.
Johnny
I am having an issue opening your scan txt files, working on it.
As far as @Adrenalinjunkie , his last activity was July last year, hopefully he will see this tag.
Johnny
Thanks for the call. I’m going to dig into everything we talked about on my next off day.
Thread
Thread Starter
Forum
Replies
Last Post
L356er
Bentley
5
Jul 28, 2022 01:35 PM
Abdullah37
Aston Martin
5
Jul 27, 2020 05:09 AM
Tiptronicus
996 Turbo / GT2
19
Nov 27, 2011 08:23 PM






