996 4S M030 suspension install
Thread Starter
|
Registered User
Joined: Mar 2014
Posts: 2
From: Seattle
Rep Power: 0
996 4S M030 suspension install
Hey guys:
I'm installing something like the 'RoW Sport Suspension for US 996 C4S' from Carnewal http://www.carnewal.com/products/996/p96063/RoW-Sport-Suspension-for-US-996-C4S) - my kit has the sway bar too.
I have the shocks (front and rear), springs, bump stops, new stabilizer bars (and bushings). Is there anything I should plan on replacing 'while I'm in there'? I do have a squeak from the front suspension which I think means the lower control arms should be replaced. Also the front driveshaft boots are split so I'll change those. Any other common failure modes? How about the front upper spring perch?
Any advice much appreciated.
Michael
2004 C4S
I'm installing something like the 'RoW Sport Suspension for US 996 C4S' from Carnewal http://www.carnewal.com/products/996/p96063/RoW-Sport-Suspension-for-US-996-C4S) - my kit has the sway bar too.
I have the shocks (front and rear), springs, bump stops, new stabilizer bars (and bushings). Is there anything I should plan on replacing 'while I'm in there'? I do have a squeak from the front suspension which I think means the lower control arms should be replaced. Also the front driveshaft boots are split so I'll change those. Any other common failure modes? How about the front upper spring perch?
Any advice much appreciated.
Michael
2004 C4S
Last edited by GT3 Chuck; Aug 12, 2020 at 04:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post