The Official 996 C4S Thread
Here is mine.
X73, Ruf front bumper, B&M Short Shifter, etc.
Here a link to my Rubber Burning fun...
http://www.lotususa.com/Alex/911Carr...oMuchFun01.WMV

e.







X73, Ruf front bumper, B&M Short Shifter, etc.
Here a link to my Rubber Burning fun...
http://www.lotususa.com/Alex/911Carr...oMuchFun01.WMV

e.






Last edited by Alexcwt; Jul 1, 2007 at 09:09 PM.
Originally Posted by dhrecon
Damn Alexcwt!!!! That was a crazy burnout! Was the transmission okay after?
Originally Posted by Mitchell Sack
question. how did you paint your shift ****? did you remove the plastic piece to paint it? if so, how did you remove it?
thanks in advance.
mitch
thanks in advance.
mitch
Originally Posted by Alexcwt
It's actually quite easy. Get some blue painter's tape. Put a bag over the shift ****. spend about 30 minutes taping the parts you don't want paint. An exacto knife helps a lot. make sure you tuck the tape between the leather and the plastic. put on very thin 4 coats of yellow and 4 coats of clear coat. let dry in between and your done. If your ****, use a little thicker coats of the clear and sand in between.







