Me too. Turbo nose+aero II sideskirt+ GT3 wing...

 

OK not anxious anymore.......thanks Austin

 

Is there anyway to put a factory turbo nose on without having to change the fenders out on a C2 cab?

 

Deputydog95
I am swapping out the front on an '02 cab to an '02 TT bumper. I was told that this is a straight swap. The only mod required is some re-working of the ducting for the different openings on the TT bumper. Someone who has done the swap should be able to confirm this.

I am also curious as to what is involved in re-working the ducts. Any info on this would be appreciated.

Dave

 

Let me know how this turns out. I had heard some people say you had to replace the fenders as well, which would be more trouble than worth it. TT bumpers can be had for less than $500 though and would be a good swap if it can be done easily. Let me know how it turns out for you. I'll be following in your footsteps if it's pretty easy.

 

No problem. I was told by Gert at Carnewal, who also sells the TT bumper, that it was a straight swap except for the duct work. I think that it may be the '01's that require some addition modifications. I'll know soon. But it will be about a month before I have it installed. I need to let the paint cure for at least 30 days before I put on the clear plastic shield and then I will have it installed. As soon as I do, I'll post back and send you a note.

Dave

 

Dave looks like we our both in the curing stage.whose doing your clear bra.

 

I plan on having it done by these guys. They did my brother's G35 coupe and it looks great. They roll the edges so that you don't see any lines if you have the whole bumper covered. It's the Xpel product.

Envisage Design Labs
Transparentbra.com
(310) 787-7544
toll free (866) 335-3456

 

KevinM: car looks great, what did you pay for the nose and paint/install? i'm definately considering this for my 99 c2.....btw, do you scrape a lot more with it? i have RoWm030, so not crazy low.....thanks!!

 

where's the best place to track down a turbo bumper. i haven't seen anything on ebay.

 

Oalvarez,
Thanks!! The bumper was $1200 and paint and install was about $1100.. I didn't scrape at all with just the bumper, when I added the bottom lip, lots of scraping.. but that is easily repaintable...

Deputydog... the TT bumper for 99-01 is from www.mashaw.com
for a 02 and up... ebay..

 

Looks great! love the OEM look. Nothing fits or looks like OEM parts.

 

Call Dayton at Departstop 818-388-7197, tell him Mississippi referred you.......he will hook you up.
Larry

 

KevinM: How was the "fitment" of your fiberglass Turbo bumper? Did everything behind the bumper line-up perfectly (just like a Porsche genuine part) or was there some modding/re-working that had to be done for the after-market bumper to actually bolt-on to the frame of the car?

Thanks,
Mark

 

Mark, fitment is perfect, my body shop said it was the best aftermarket spoiler that they have installed. Labor was needed to sand it and prime it, its just not a paint and install piece as the OEM is.. but I am very happy with it.