New Mods @ SharkWerks: EVOMS EVT700 Kit, TechArt GT Street & Tubi Race Exhaust
The one on the front lift... Doing the back bumper right now and it's looking neat. A lot more aggressive now to match the big-**** wing
The other one was the GT3 getting ze pipes...
The other one was the GT3 getting ze pipes...
I'll put a couple more tonight before going home if I can
Finished up the front bumper now with all the CF stuff.. We got it cleared as opposed to the matte finish. I think it will hold up better against the elements that way...
Doing the intercoolers, hoses and the rear section. The rear bumper section isn't too bad to do so that's going well!
Finished up the front bumper now with all the CF stuff.. We got it cleared as opposed to the matte finish. I think it will hold up better against the elements that way...Doing the intercoolers, hoses and the rear section. The rear bumper section isn't too bad to do so that's going well
!
ok fellas, just a quick update before we head home. The front end _conversion_ is done and it's the most aggressive front I've seen on a 997. Up there with the GT3RS for sure. We got the carbon lip and vent clear coated...
With the turbos/BRVs and all the oil/water lines back on we dusted off the Tubi Race exhaust. So far so good. Hmm the cats seem to have gone missing
James is buttoning up the heat shields but you can see it's quite different to the "street" version being a single canister design. I'll be sure to take some video once she's broken in.
The rear end needs to be modified to fit the larger intercoolers but the shrouds still fit well.
Test fitting the rear bumper..
Very aggressive looking and _huge_ openings exposing those intercoolers
Very aggressive looking indeed but houston (Stuttgart) we have a problem
Unless we stay reverse DTM the Tubi Race Exhaust and GT Street rear end is going to need some more modification. This is why TechArt has another muffler I would imagine. The outlet for the tips isn't in the same spot as OEM. We'll have to weld some extensions and bends to the outlet pipes and we'll be ok. More work for tomorrow
With the turbos/BRVs and all the oil/water lines back on we dusted off the Tubi Race exhaust. So far so good. Hmm the cats seem to have gone missing
James is buttoning up the heat shields but you can see it's quite different to the "street" version being a single canister design. I'll be sure to take some video once she's broken in.
The rear end needs to be modified to fit the larger intercoolers but the shrouds still fit well.
Test fitting the rear bumper..
Very aggressive looking and _huge_ openings exposing those intercoolers
Very aggressive looking indeed but houston (Stuttgart) we have a problem
Unless we stay reverse DTM the Tubi Race Exhaust and GT Street rear end is going to need some more modification. This is why TechArt has another muffler I would imagine. The outlet for the tips isn't in the same spot as OEM. We'll have to weld some extensions and bends to the outlet pipes and we'll be ok. More work for tomorrow
AGREED oh man that is so serious!! Loving the mod's man.
BTW you really SHOULD slap a LWFW in if you don't have it already!
BTW you really SHOULD slap a LWFW in if you don't have it already!