Hey folks, now that we've spent some time on this new software tweak, I just wanted to give you our experience with the new EVOMSit software for the tiptronic transmission. We brought in one of our favorite 997TT EVT700 Tiptronic projects to perform the upgrade on (plan on at least a couple of hours to remove/re-install the TCU).



First thing you notice is the increase to the TCU rev limiters to match the raised rev limiters in the ECU which lets you shift at 7000 RPMS which is 250 RPMS higher than stock. And yes the shifting quicker and increased the TQ limits to maximize acceleration and power delivery.

Normal driving is just that. There's no stutters or driveability issues. Now put the hammer down and watch the revs go deeper into redline before shifting. And then as far as the shift goes it's quite a dramatic difference if you're used to the rather sedate sloppy shifts (especially that 3rd to 4th). It certainly cuts down the time it takes. One other nice thing is on the down shift. The revs drop considerably quicker. If I had to come up with some sort of analogy I'd compare it to driving a 6speed car with a dual mass flywheel and then upgrading to a single mass light weight flywheel. It's that noticeable and a pretty neat upgrade for Tiptronic owners.



As a former 996TT tiptronic owner (back in the day) I only wish I'd had something like this available in my drag racing days So although Tip guys can't upgrade to a LWF like the 6speed guys at least there's another mod for you to do to help with the transmission

We're offering this service as of now and for more: http://www.sharkwerks.com/products.php?pid=229

 

Another quality product/project. I imagine it makes a world of difference.

 

Alex can you do the down load at your shop or dose it get sent to AZ?? For us local P car peeps it would be nice to drive by Sharkwerks and have a down load done that day. Please do tell. Hope your enjoying the summer. Marco

 

is this available for the 996tt tip?

 

Hey Marco, summer is going well thanks (same to you!) and yes this is a service we'll be offering at the shop
It will be very shortly, yes

 

Do you have a dyno run on it yet?

 

Any real life diff in performance and numbers ???