Here is the new 20" Modulare Forged C11 concave wheel in the brushed finish, on a 2010 997.2 C4S cab, 20x8.5 and 20x12. Enjoy the pics!

 

The wheels look really clean. The only concern I have is that the end of the spokes on the fronts stick out a hair past the edge of the lip. It would be better if the end of the spokes where flush with the lip or slightly within the lip dish. Anyhow, I really like these new concave style of wheels that are coming out, nice job.

 

Man they look good.. The only thing is the rears look like they could have more lip... Unless my eyes are playing tricks on me. Looks like maybe 3- 3.5 inch lip. Would be nice if they were 4-4.5 lip. (between spokes that is)

 

Nice wheels Peter! We just added them to the gallery

Peter correct me if I'm wrong, those wheels have a 4" outer right but most registers take up about .5' to 1.0'?

 

Hey Matt,

Normally, on a "standard" type forging, a 4" lip is std on the 997 C4S and turbo. Because the spokes are concave, a 3.5" outer lip was used in order to give the center more room to clear the rear brakes. The register area on this style is not any thicker than a regular series, so the visible lip between the spokes is still 3.5". Modulare chose not to over-exaggerate the "step" between the spoke and the register, as they felt a cleaner look migh be achieved.