GT Design 997 Carbon Side Diffusers - Special Intro Prices!
#1
GT Design 997 Carbon Side Diffusers - Special Intro Prices!
GT Design Porsche 997 Carbon Fiber Side Diffusers
Retail Price: $1000
Special Introductory Price: $800
Similar to custom side diffusers seen on Porsche Cup Cars, these side are a great aerodynamic and cosmetic addition to the side profile of any narrow body 997 Porsche. Based on aerodynamic theory, the side diffusers improve aerodynamic efficiency on the side of the car by smoothing out turbulent air generated by wider aftermarket wheels and tires and air coming out from underneath the car. The simple yet aggressive design only extends 1" past the outer most edge of the factory side for minimal obstruction but with the slope of the body the side diffuser gives the car a lower and wider look and also lines up with the outer edge of most aftermarket wheels for a matched appearance. The GT Design Side Diffusers were designed from scratch in-house from a blank slate specifically for the 997 body. They feature a shape contoured design to fit perfectly flush against the body for ease of alignment and installation without any measuring or guessing. The side diffusers install simply using one strip of double sided tape, used to prevent scratching the factory side skirt, and 3 small screws. Installation is completely reversible without leaving any visible damage behind. Use of factory jack points if retained and each side weighs 1 lbs.
GT Design side diffusers are manufactured in Southern California using the highest quality materials. They are produced using Hexcel certified carbon fiber for added strength and durability and zero shrink TP high solid resin molds that are autoclave grade rated to 485F. The finish is a high polished UV inhibiting gel coat that protects the carbon from damage due to sun exposure. The surface is smooth and solid unlike many cheap products produced overseas that have wavy/rippled porus panels that require much prep work and application of a clear-coat. Side diffusers come pre-drill for installation with stainless steel screws and pre-applied 3M double-sided tape.
Official sale thread will be in the vendor classified section.
*** For a limited number of members of 6speedonline community, we will be offering a partial sponsorship program. We are looking for active members of the community to demo our products within their respective regions and/or clubs. If interested, please PM us or email me at james@gotuning.com for inquiry regarding our partial sponsorship program. If you could attach a couple pictures of your car, it would help with the selection process. Thank you ***
Retail Price: $1000
Special Introductory Price: $800
Similar to custom side diffusers seen on Porsche Cup Cars, these side are a great aerodynamic and cosmetic addition to the side profile of any narrow body 997 Porsche. Based on aerodynamic theory, the side diffusers improve aerodynamic efficiency on the side of the car by smoothing out turbulent air generated by wider aftermarket wheels and tires and air coming out from underneath the car. The simple yet aggressive design only extends 1" past the outer most edge of the factory side for minimal obstruction but with the slope of the body the side diffuser gives the car a lower and wider look and also lines up with the outer edge of most aftermarket wheels for a matched appearance. The GT Design Side Diffusers were designed from scratch in-house from a blank slate specifically for the 997 body. They feature a shape contoured design to fit perfectly flush against the body for ease of alignment and installation without any measuring or guessing. The side diffusers install simply using one strip of double sided tape, used to prevent scratching the factory side skirt, and 3 small screws. Installation is completely reversible without leaving any visible damage behind. Use of factory jack points if retained and each side weighs 1 lbs.
GT Design side diffusers are manufactured in Southern California using the highest quality materials. They are produced using Hexcel certified carbon fiber for added strength and durability and zero shrink TP high solid resin molds that are autoclave grade rated to 485F. The finish is a high polished UV inhibiting gel coat that protects the carbon from damage due to sun exposure. The surface is smooth and solid unlike many cheap products produced overseas that have wavy/rippled porus panels that require much prep work and application of a clear-coat. Side diffusers come pre-drill for installation with stainless steel screws and pre-applied 3M double-sided tape.
Official sale thread will be in the vendor classified section.
*** For a limited number of members of 6speedonline community, we will be offering a partial sponsorship program. We are looking for active members of the community to demo our products within their respective regions and/or clubs. If interested, please PM us or email me at james@gotuning.com for inquiry regarding our partial sponsorship program. If you could attach a couple pictures of your car, it would help with the selection process. Thank you ***
Last edited by GT Design; 04-28-2010 at 10:48 AM.
Thread
Thread Starter
Forum
Replies
Last Post