New look with polyurethane parts
Registered User
Joined: Jan 2008
Posts: 2,370
From: Vancouver
Rep Power: 329
If you accidentally hit something...there is a good chance you will have destroyed anything fiberglass.
One downside to polyurethane is....in hot hot weather they will sag and warp if not fastened properly.
Stacy
Last edited by justatoy; Jan 31, 2010 at 11:02 AM.
Registered User
Joined: Oct 2004
Posts: 1,224
From: Oregon
Rep Power: 80
YUP polyurethane is durable/flexible and fiberglass is NOT!
If you accidentally hit something...there is a good chance you will have destroyed anything fiberglass.
One downside to polyurethane is....in hot hot weather they will sag and warp if not fastened properly.
Stacy
If you accidentally hit something...there is a good chance you will have destroyed anything fiberglass.
One downside to polyurethane is....in hot hot weather they will sag and warp if not fastened properly.
Stacy
Thanks for the reply. Do you know what is used for the aftermarket parts for:
Porsche OEM GT3 Front Bumper
TechArt Side Skirts
Rinspeed "Indy" Rear Bumper
Registered User
Joined: Jan 2008
Posts: 2,370
From: Vancouver
Rep Power: 329
Techart......same as above....very flexible
Rinspeed...I believe I read somewhere it is fiberglass(can't seem to find any info on the material BUT 99% sure it is fiberglass)
Stacy
Last edited by justatoy; Jan 31, 2010 at 11:25 AM.
Registered User
Joined: Jan 2008
Posts: 2,370
From: Vancouver
Rep Power: 329
My pleasure JoeShark and Thanks for the rep points......Jim(jjc4scab) is going to hate this,LOL!
Stacy
Stacy
Thread Starter
|
Registered User
Joined: May 2008
Posts: 464
From: san diego
Rep Power: 39
YUP polyurethane is durable/flexible and fiberglass is NOT!
If you accidentally hit something...there is a good chance you will have destroyed anything fiberglass.
One downside to polyurethane is....in hot hot weather they will sag and warp if not fastened properly.
Stacy
If you accidentally hit something...there is a good chance you will have destroyed anything fiberglass.
One downside to polyurethane is....in hot hot weather they will sag and warp if not fastened properly.
Stacy
http://gt3tek.com/products/911rf.htm
Also, check out the 993 RS kit. what a beauty. The owner of the blue 993 is the current PCA president San Diego. He tracks this car and He bottomed out several times already and the lip held with out a hitch.
http://gt3tek.com/993gt.htm
Last edited by awcayenne; Jan 31, 2010 at 03:57 PM.
Registered User
Joined: Jan 2008
Posts: 2,370
From: Vancouver
Rep Power: 329
I think I would just paint it black...not flat black.....but try it....worst case scenario repaint it...I would be curious to see how the flat black looks!
I just think it is a little too big of a piece to have a color change........unlike a stock GT3 lip(smaller,less pronounced).
Stacy
Last edited by justatoy; Feb 1, 2010 at 11:05 PM.
Registered User
Joined: May 2009
Posts: 288
From: PA
Rep Power: 29
Hello Guys,
The installation is very easy,up in the front you use 3M double sided tape the end you drill a hole to screw in and down at the bottom there a three holes that have to be drilled to bolt down. The fit is awesome, it will take you a minute to fit. The quality and materials we use are of the highest quality. Check for more products we will be offering in the future for your 997 at www.gt3tek.com The rockers are very similar to tech arts with the exception that our line up right below th door line were tech arts is almost a full inch. We will be posting a link on youtube showing the installation very soon.
The installation is very easy,up in the front you use 3M double sided tape the end you drill a hole to screw in and down at the bottom there a three holes that have to be drilled to bolt down. The fit is awesome, it will take you a minute to fit. The quality and materials we use are of the highest quality. Check for more products we will be offering in the future for your 997 at www.gt3tek.com The rockers are very similar to tech arts with the exception that our line up right below th door line were tech arts is almost a full inch. We will be posting a link on youtube showing the installation very soon.
Registered User
Joined: Feb 2010
Posts: 17
From: seattle
Rep Power: 0
Will that front lip fit on a 2007 C4S? Also, even though it flexes, doesn't the paint itself crack when it flexes? I'm having tons of trouble with a techart kit and am looking for a rubberized front lip, but this one looks nice and will match my sideskirts. Lastly, what color is the actual material itself (wondering what color is exposed if/when paint is scraped off)?
Thanks for posting this, btw!
Thanks for posting this, btw!
Registered User
Joined: May 2008
Posts: 2,295
From: deep inside my other half
Rep Power: 0
Man u r a fukin ***** bag....do u know that! WTF is this, throw Jim under the bus day! WTF! LOL
Registered User
Joined: Apr 2005
Posts: 690
From: Miami, FL
Rep Power: 53
I really like the front lip, not feeling the rear diffuser though. If you guys have any plans on making bumpers I think a gt3.2 look bumper with quad exaust and some kind of amg style center diffuser would look really good.
Thread Starter
|
Registered User
Joined: May 2008
Posts: 464
From: san diego
Rep Power: 39
My car was the model for the fit.
Registered User
Joined: Jan 2010
Posts: 253
From: LA
Rep Power: 42
Hello Guys,
The installation is very easy,up in the front you use 3M double sided tape the end you drill a hole to screw in and down at the bottom there a three holes that have to be drilled to bolt down. The fit is awesome, it will take you a minute to fit. The quality and materials we use are of the highest quality. Check for more products we will be offering in the future for your 997 at www.gt3tek.com The rockers are very similar to tech arts with the exception that our line up right below th door line were tech arts is almost a full inch. We will be posting a link on youtube showing the installation very soon.
The installation is very easy,up in the front you use 3M double sided tape the end you drill a hole to screw in and down at the bottom there a three holes that have to be drilled to bolt down. The fit is awesome, it will take you a minute to fit. The quality and materials we use are of the highest quality. Check for more products we will be offering in the future for your 997 at www.gt3tek.com The rockers are very similar to tech arts with the exception that our line up right below th door line were tech arts is almost a full inch. We will be posting a link on youtube showing the installation very soon.
