Feedback on 997 Turbo Kits
#31
I have also TPC turbo kit on my 996 3.6 and it is still not running well....... I still cannot get it in closed loop and my tuner says it is running lean. So my car is in work now for almost 6 months. Maybe one of you guys can point me to the problem with it :
1. Durametric or other cable did not find any problem
2. Car is running on idle too much dry
3. If you give throttle the car is stalling
I would be very happy if someone had same problems and would help me on it. If someone needs logs I can post them.
Best regards,
Kras
1. Durametric or other cable did not find any problem
2. Car is running on idle too much dry
3. If you give throttle the car is stalling
I would be very happy if someone had same problems and would help me on it. If someone needs logs I can post them.
Best regards,
Kras
I did have a similar open loop problem for a while. Turned out the filter that came with the kit had become EXTREMELY dirty (almost black). Given it sucks air directly from engine compartment with no shielding (hot air) and the filter was clogged (limiting air flow) the car was idling very rough and would actually stall when going to idle/open loop. I replaced the filter with a larger cone filter and actually did some customization on my deck lid to draw in more cold air. Solved my issue.
Last edited by Volant997; 07-14-2011 at 05:44 PM.
#32
Our 15,000sqft shop has 7 lifts, full fab department including carbon fiber development, Mustang AWD. We sell alot of parts, but we make them too
Tuning is the key to any forced induction kit.
#33
Kras,
I did have a similar open loop problem for a while. Turned out the filter that came with the kit had become EXTREMELY dirty (almost black). Given it sucks air directly from engine compartment with no shielding (hot air) and the filter was clogged (limiting air flow) the car was idling very rough and would actually stall when going to idle/open loop. I replaced the filter with a larger cone filter and actually did some customization on my deck lid to draw in more cold air. Solved my issue.
I did have a similar open loop problem for a while. Turned out the filter that came with the kit had become EXTREMELY dirty (almost black). Given it sucks air directly from engine compartment with no shielding (hot air) and the filter was clogged (limiting air flow) the car was idling very rough and would actually stall when going to idle/open loop. I replaced the filter with a larger cone filter and actually did some customization on my deck lid to draw in more cold air. Solved my issue.
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
997 Turbo Vendor Classifieds
0
08-20-2015 02:38 PM
PelicanParts.com
GT3/GT2/GT Vendor Classifieds
0
08-20-2015 02:37 PM
PelicanParts.com
GT3/GT2/GT Vendor Classifieds
0
08-18-2015 03:42 PM
PelicanParts.com
997 Turbo Vendor Classifieds
0
08-18-2015 03:41 PM