Originally Posted by gsxr_fvr

question for the guys running front led's. Are your bottom led's "fogs" on during daytime as DRL or just the one in the middle

Originally Posted by 808c2s

You need a module to be able to run the LED as a DRL, and the "fogs" are the DRL. Not the middle LED.

Originally Posted by Pulmonia

Module 200$, bad and expensive idea, i used a diode=1$

Originally Posted by Pulmonia

Module 200$, bad and expensive idea, i used a diode=1$

Originally Posted by AP1to911

Hi I have an OEM GT3RS front bumper For Sale. It comes with all the parts needed for upgrade.


Please check the classifieds for more information.


You can contact me at : benjir88@gmail.com
For quickest response.



Thank you!
-Ben

Originally Posted by Phil_D

X2 Really simple to do and cheap.

Originally Posted by gsxr_fvr

Can you guys share exactly which type "diode" you are using, like how many amps, series etc so I dont sound like a complete tard at the electronic store.

Originally Posted by Phil_D

50v 1 amp from RadioShack.

Here's all the info you need;

http://rennlist.com/forums/9458453-post23.html

I cut the wires on the diode down and it fitted neatly back inside the connector cover. Been running it for a year with no issues at all.

Originally Posted by AP1to911

Hi I have an OEM GT3RS front bumper For Sale. It comes with all the parts needed for upgrade.


Please check the classifieds for more information.


You can contact me at : benjir88@gmail.com
For quickest response.



Thank you!
-Ben

Originally Posted by gsxr_fvr

Thanks Ben,
Payment sent, can't wait to get the bumper, then paint then Install...lol
What's the difference between GT3 & GT3RS anyways. I am looking at pics & can't really tell the difference.

Originally Posted by tphan

FWIW, my front GT3 is OEM, rear bumper is Misha, both prep/painted by same shop. Front look perfect, rear looks "textured" like. Recently, had an OEM aerokit wing painted by diff shop, came out near perfect as the front.

Originally Posted by JCD911S

Yes, the texture on the rear bumper is due to the lesser quality of the fiberglass bumper, BUT, there's no reason why it can't be as smooth as OEM. It just needs extra prep work, primer surfacer and extra block sanding. If you find a body shop willing to go that extra mile, texture shouldn't be an issue. I have misha bumpers and they came out as smooth as the metal panels.

That being said, if the OP is going for the GT3 look, it's best to stick to the OEM version for the best fitment.

[ATTACH][/ATTACH]

Originally Posted by Xander

Here's and "old" picture of mine, I went wingless, and with the Misha bumpers. No complaints except lead times.





X...