I am getting ready to have the clutch replaced, 87k, and would like to do the AOS at the same time. Has anyone installed the Motorsports Cup Air -AOS- Oil Separator that is sold by Suncoast in a 997.1 3.8 motor. Are modifications required for the installation. I track the car and this is a modification I see recommended.

 

Go over to pelican... iirc, they have some long winded schpeal on that unit versus the stocker unit.

 

Patrick thanks for the reply.
I read the article at Pelican and if it is the one you are referring to, it talks about how to replace the oem aos but nothing about the motorsports version. I have done searches on most of the forums and have not had much luck on this subject.

 

I searched Pelican, planet 9, rennlist, etc when I was considering the upgrade. Yes, there isn't one specific to the 997. I am not tracking my car and based on numerous feedback and taking into account the high price of the upgrade relative to the base AOS, I decided to not install it.

I bet the retrofit mods wouldn't be too much involved - but then again, ez and hard ratings are subjective.


GL and keep us posted.

 

well at least they say "modifications may be required to fit some models" as i was pretty sure the MoSport version doesn't (out-of-the-box) fit the S. i have heard from an indy or 2 that it's possible to modify/install in an S but not easy or preferable. Would be nice to hear otherwise as i would also be interested since i track.

good luck