Just had motor out to do injectors and now installer is having difficulty getting the clutch pedal to return to the top position sporadically(First pump it does not come up, if you pump it a few times it will return to normal) . He has bled the clutch fluid 3x with no change. I do have the GT2 slave cyl mod and Sachs 2.5 clutch installed (Which I have had 2 + years with no problems) the pedal was working perfectly fine before we dropped the motor.

Suggestions? Ideas?

 

Every time you pump the pedal and it returns to normal position check the fluid, it is likely low. If so then top up the fluid and pump the pedal another 50 times and recheck the level. Keep repeating until there is no more loss of fluid.