Hey guys,

I received a set of pictures from the Aston owner who sent me the pictures. Obviously to respect the privacy of the individual I won't say any specifics, however I did want to show a picture of the wheels (albeit on a DB9 instead of V8V).

It becomes clear exactly what type of look I was going for with my custom one-off M10s w/ HRE offset. So to say they are anything less than drop dead gorgeous would be an understatement . By far the most OEM looking option I have seen to date.

enjoy,
007

FYI, it appears many aston members are having issues finding rear lugnuts that will work with their HREs (and Rennen, etc wheels).

You will need a 1.5" acorn style lugs to make them work, Rennen does carry the appropriate type, (they are a special order item, otherwise you will get stuck with open ended lugs which are ugly IMO).

They make both hex and spline socket for the appropriate lug. Also, the aston studs are actually a Ford Truck part believe it or not. There are plenty of 2" lugs (ugly b/c they stick out too much), and 1" closed end, but 1.5s are hard to find.

Try contacting Rennen East Coast for more info on the lugs.

hope that helps,
007

These also work, and you can just order off of the site...no need to contact anyone and shipping is quick as well.

http://www.otisincla.com/product/B-D...41mm-Zinc.html

Nice wheels by the way.....

Good link, yes those should work. Do they come with a slim socket as well ?

Spline lug nut sets come with the slim low profile socket as well so that may be a positive benefit going that route vs. Hex, but if you can fit a hex then go ahead and get those.

^^Yep, thin walled hex deep 19mm socket fits with plenty of room..

Perfec