Brake light not working
#16
yes..... it came off a DB9, but ive been told they are suppoosed to be the same part. it doesnt look like they are identical, or im missing a the tequinque to adjust it better. it seems pretty straight forward, and what i need to do to get the edge to tuck in would push the inner side WAY out where it would not be flush. the stock , original side is flush from side to middle to inner .
i took the worst angle so you can see the issue, but it does look pretty good in person. (but , i would think this car should be perfect in areas like this)
i took the worst angle so you can see the issue, but it does look pretty good in person. (but , i would think this car should be perfect in areas like this)
#17
It will fit, part number is 4G43-13405-AL
Just the left light has been installed to tight on a previous car which has caused the corner to curl the red lens..you will never be able to make it flush unless you heated the and curved it back in hopes that it will work not not crack (by corner I mean the left most end of the left tail light)
The adjustment is also....hehe horrible. Both lights are out of adjustment, your right light should not have a gap light that at the right most corner also.
The mid section will be flush to the tail lid at the top and the side..the corner will be almost flush to the 1/4 panel..
Adjusting the lights until you get the hang of it..can take 5 minutes to daaaays on end!!
Just the left light has been installed to tight on a previous car which has caused the corner to curl the red lens..you will never be able to make it flush unless you heated the and curved it back in hopes that it will work not not crack (by corner I mean the left most end of the left tail light)
The adjustment is also....hehe horrible. Both lights are out of adjustment, your right light should not have a gap light that at the right most corner also.
The mid section will be flush to the tail lid at the top and the side..the corner will be almost flush to the 1/4 panel..
Adjusting the lights until you get the hang of it..can take 5 minutes to daaaays on end!!
__________________
__________________
Technical Director
Christopher Edgett
Velocity Automotive Performance Limited
214 Maple Ave.
Oliver, B.C
Canada V0H 1T9
Office: (1)250-485-5126
Email: Tuning@VelocityAP.com
www.velocityap.com
__________________
Technical Director
Christopher Edgett
Velocity Automotive Performance Limited
214 Maple Ave.
Oliver, B.C
Canada V0H 1T9
Office: (1)250-485-5126
Email: Tuning@VelocityAP.com
www.velocityap.com
#18
It will fit, part number is 4G43-13405-AL
Just the left light has been installed to tight on a previous car which has caused the corner to curl the red lens..you will never be able to make it flush unless you heated the and curved it back in hopes that it will work not not crack (by corner I mean the left most end of the left tail light)
The adjustment is also....hehe horrible. Both lights are out of adjustment, your right light should not have a gap light that at the right most corner also.
The mid section will be flush to the tail lid at the top and the side..the corner will be almost flush to the 1/4 panel..
Adjusting the lights until you get the hang of it..can take 5 minutes to daaaays on end!!
Just the left light has been installed to tight on a previous car which has caused the corner to curl the red lens..you will never be able to make it flush unless you heated the and curved it back in hopes that it will work not not crack (by corner I mean the left most end of the left tail light)
The adjustment is also....hehe horrible. Both lights are out of adjustment, your right light should not have a gap light that at the right most corner also.
The mid section will be flush to the tail lid at the top and the side..the corner will be almost flush to the 1/4 panel..
Adjusting the lights until you get the hang of it..can take 5 minutes to daaaays on end!!
the other side doesnt look that far off the body in person.... kind of the camera angle. (that gap you see)
Thread
Thread Starter
Forum
Replies
Last Post
Walorus
Boxster / Cayman
0
08-18-2015 01:39 PM