When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone installed 11MM H&R wheel spacers(2265681CR) on his VH2 and can tell me which wheel bolts must be bought?
I am driving a Vantage V8 Coupé (2006) with 235/45ZR18 at the front. The original wheel bolts will be to short now.
with 11mm spacers you can get new nuts which have the thread all the way from the start of the nut thereby picking up a couple of extra turns and so you dont need new bolts
From memory you get 8 full turns on the revised nuts and existing bolts
with 11mm spacers you can get new nuts which have the thread all the way from the start of the nut thereby picking up a couple of extra turns and so you dont need new bolts
From memory you get 8 full turns on the revised nuts and existing bolts
with 11mm spacers you can get new nuts which have the thread all the way from the start of the nut thereby picking up a couple of extra turns and so you dont need new bolts
From memory you get 8 full turns on the revised nuts and existing bolts
H&R sell them as do Redpants I believe
Graeme
I thought that those spacers were supposed to come with the new nuts as part of the kit (2265681CR)?
I'm assuming the spacers were only installed on the rear. Do the provided nuts match the OEM ones on the front as far as looks? If not, does anyone have a part number for the nuts themselves?
