Hi,
i am looking to fit some spacers to my 2013 DB9.2, i see loads of info on Vantage and earlier DB9’s however not much for the later model. I have 23mm rear and 11mm front H&R spacers. Fronts I believe are ok as the come with the lug nuts with extra thread, any experience with the 23mm rears? Seeing some issues with the bolt extending past the spacer and the wheel not fitting without trimming. I believe my wheels have pockets looking at a set on ebay but has anyone experienced any issues on this model?
thanks

 

Buy a high quality set because nothing is worse than a slight shimmy. H&R 4665681 are perfect but validate for your model.

23mm isn’t even an inch so yes they will extend past the spacer. If your wheels have pockets that align you are good. If not sure they can be cut down but if you ever go back to removing the spacers you will have to install new hub bolts. Not a lot of drama but just to know.

To validate remove a wheel and measure the distance the bolt extends from hub. Anything past 23mm….

 

Hi,
Thats the ones i have bought, im sure my rims have pockets but can’t check for sure as i work abroad. The Mrs will take it to have them fitted along with new tyres so soon find out i guess!!
thanks