PES 4.2 Supercharger...nearing completion
Registered User
Joined: Sep 2008
Posts: 120
From: Glendale, CA
Rep Power: 22
I don't think you would have the same settings for S5 vs RS4 and R8... the S5 only runs 11:1 compression whereas the RS4 and R8 are running 12.5:1 -- so you'd think the S5 could take a little more boost.
Either way, if it won't pop an RS4/R8 motor, it really won't pop an S5 motor.
Either way, if it won't pop an RS4/R8 motor, it really won't pop an S5 motor.
Banned
Joined: Nov 2008
Posts: 122
From: College Station, TX
Rep Power: 23
Your pics are of the VF kit? I don't see the similarity either. It looks more like the MTM kit, IMHO.
Banned
Joined: Feb 2008
Posts: 457
From: U.S.A
Rep Power: 0
you guys are right, I don't know what I was thinking..lol
anyways, when could we expect some pics/vids/... ?
Banned
Joined: Nov 2008
Posts: 175
From: Southampton
Rep Power: 0
Hi guys,
As you all know here at PES we test and develop to OEM standards. Our 4.2 supercharger kit, has been developed using three of our shop cars, a 2001 A6, 2005 A8 but most of all our 2005 S4 auto . Unfortunately for us we can not go out and buy every Audi that came with a 4.2 MPI to test fit and perform final tuning. So at this time I would like to announce that we are taking applications for final fit and tuning for the following vehicles ; 2008/2009 S4, 2006 A6, 2006 A8, 2005 All Road and the 2006 Volkswagen Touareg. This opportunity will of course benefit PES so in turn we want to benefit by offering a discount on the kit and the install to the select few cars we chose.
Please e-mail me at Patrick@PES-Tuning.com and ask for an "Application for the 4.2 MPI SC kit". when I have a good amount of requests I will send out a response with an application form. Please do not include all of your vehicle information at this time, just your name and contact info. And as always thank you from the team here at PES.
,Patrick
Patrick@PES-Tuning.com
Pes-Tuning.com
Chip2Perform.com
As you all know here at PES we test and develop to OEM standards. Our 4.2 supercharger kit, has been developed using three of our shop cars, a 2001 A6, 2005 A8 but most of all our 2005 S4 auto . Unfortunately for us we can not go out and buy every Audi that came with a 4.2 MPI to test fit and perform final tuning. So at this time I would like to announce that we are taking applications for final fit and tuning for the following vehicles ; 2008/2009 S4, 2006 A6, 2006 A8, 2005 All Road and the 2006 Volkswagen Touareg. This opportunity will of course benefit PES so in turn we want to benefit by offering a discount on the kit and the install to the select few cars we chose.
Please e-mail me at Patrick@PES-Tuning.com and ask for an "Application for the 4.2 MPI SC kit". when I have a good amount of requests I will send out a response with an application form. Please do not include all of your vehicle information at this time, just your name and contact info. And as always thank you from the team here at PES.
,Patrick
Patrick@PES-Tuning.com
Pes-Tuning.com
Chip2Perform.com
Last edited by Patrick - PES; Nov 25, 2008 at 08:00 AM.
Registered User
Joined: Dec 2008
Posts: 2
From: Hartford, CT
Rep Power: 0
Ugh... can't PM yet.
Good evening!
I saw your post about that supercharger for the 4.2L V8 Audi. I have a 2000 A6 I was looking at playing around with. What else can you tell me about this supercharger? Will it be released on time? Any clue, ballpark, what the price will be?
MotoDyne makes one that looks slightly similar, but theirs is 10k. That's basically 1k per horsepower gain... too much in my opinion.
Also, random, were those images generated in SolidWorks by chance? I'm a mechanical design engineer and I use SW every day. Just curious...
Thanks!
-Brad
Good evening!
I saw your post about that supercharger for the 4.2L V8 Audi. I have a 2000 A6 I was looking at playing around with. What else can you tell me about this supercharger? Will it be released on time? Any clue, ballpark, what the price will be?
MotoDyne makes one that looks slightly similar, but theirs is 10k. That's basically 1k per horsepower gain... too much in my opinion.
Also, random, were those images generated in SolidWorks by chance? I'm a mechanical design engineer and I use SW every day. Just curious...
Thanks!
-Brad
Thread Starter
|
Banned
Joined: Jul 2003
Posts: 192
From: PA, USA
Rep Power: 30
Ugh... can't PM yet.
Good evening!
I saw your post about that supercharger for the 4.2L V8 Audi. I have a 2000 A6 I was looking at playing around with. What else can you tell me about this supercharger? Will it be released on time? Any clue, ballpark, what the price will be?
MotoDyne makes one that looks slightly similar, but theirs is 10k. That's basically 1k per horsepower gain... too much in my opinion.
Also, random, were those images generated in SolidWorks by chance? I'm a mechanical design engineer and I use SW every day. Just curious...
Thanks!
-Brad
Good evening!
I saw your post about that supercharger for the 4.2L V8 Audi. I have a 2000 A6 I was looking at playing around with. What else can you tell me about this supercharger? Will it be released on time? Any clue, ballpark, what the price will be?
MotoDyne makes one that looks slightly similar, but theirs is 10k. That's basically 1k per horsepower gain... too much in my opinion.
Also, random, were those images generated in SolidWorks by chance? I'm a mechanical design engineer and I use SW every day. Just curious...
Thanks!
-Brad
Dont really think our kit looks anything like Motodyne! For the record, several years back motodyne used to post pics of the PES 2.8 kit on their site and say it was the Motodyne kit. Funny thing is they never bought one single kit from us.
The solid model was created in SolidWorks. Our design team lives on it. Kudos to our team and you for working on it every day. Definately not for novices
Thread Starter
|
Banned
Joined: Jul 2003
Posts: 192
From: PA, USA
Rep Power: 30
