F/S Wilhelmy RemoteKey Module for 997 - 6SpeedOnline - Porsche Forum and Luxury Car Resource

jhbrennan · 2006-12-10 01:56:52

Never installed. $200+shipping. PM if interested

#4

12-09-2006, 11:01 PM

jhbrennan

Registered User

Thread Starter

Join Date: Apr 2006

Location: Austin

Posts: 5,259

Rep Power: 768

The remoteKEY997 offers plenty of customizable, useful features, in one easy to install product.

Plug and Play: can be installed by anyone in about 30 minutes.
No soldering - No permanent changes to the vehicle!

Features

Remote window control: Easy one-touch comfort operation of windows with the original remote on all models (US and Euro) by holding down the power-locks button. No extra remote fob or reprogramming of the key or car is necessary!
The "Lock-In" feature locks the doors once the car starts moving. In contrast to the original Porsche feature which can only be enabled or disabled at the dealership, this feature is user-programmable and even better, optionally the doors also unlock when the engine is switched off and the key removed.
Home light XL: The Headlights can be activated for 30 seconds at any time by tapping the trunk button on the remote twice. Tapping the button twice again before the time runs out will switch the lights off immediately.
Trunk button delay: Prevents accidental opening of the trunk in most cases. If activated, the trunk can only be opened by holding down the trunk button on the remote for longer.
Chirp on lock/unlock: If activated, the alarm horn will give brief "chirp"signals when locking/unlocking the car.
Auto-Tilt function for the passenger-side mirror on reverse gear. A great addition for cars without seat-memory.
Passenger window auto-up fix for all cars where the window will only roll up automatically once it is past half way. Usually found on 997 Coupes
User programmable: All features can be individually enabled or disabled. Some also allow different personal preferences to be set. All settings are retained even if the car battery is disconnected.
Shop/Diagnose mode: The chip can be set to be completely passive, as if it was not installed at all. It becomes "invisible" and will not interfere with any dealer diagnostic tools.