FS: 996 stuff: GT3 MKII Bumper, Carbon Sills, Spacers, NT-01s
Thread Starter
|
Registered User
Joined: Jul 2007
Posts: 138
From: Ohio
Rep Power: 24
FS: 996 stuff: GT3 MKII Bumper, Carbon Sills, Spacers, NT-01s
A bunch of 996 stuff for sale:
1) A MKII OEM GT3 bumper, silver. This is an OEM bumper, has black lip splitter. It is currently silver and was off a GT3 with about 12,000 miles on it. It had a clearbra, so it is in good shape and will make for a nice repaint.
Local pickup in Southern Cal., $SOLD
2) A set of 4 used Nitto NT-01 tires. I bought these off another rennlister, and never even installed them. I need the space before I will be able to get them installed and run, so I need to move them. They have around 50% tread left, give or take, and I believe the sizes are 225/40/18 and 275/35/18.
Local pickup in Southern Cal., $SOLD
3) A set of aftermarket long carbon door sills. I bought a set from Maxspeed Motorsports on ebay a while back, but they didn't fit too well. I sent the set back and waited about 3 months for a redesigned version to come in. In the meantime, I bought a set of OEM sills and installed them, so I don't have the need for these anymore. They were damaged slightly in shipping and there is one small visible crack on one of them, I will post pictures later. I didn't feel it was worth sending these back for another set as the damage isn't that bad. I think I paid about $300 shipped, I will sell these for $175 picked up. They really look quite nice. I have a set of "Carrera" stickers to install, but never put them on. As mentioned above, these haven't been installed.
Local pickup in Southern Cal., $SOLD
4) 2 sets of spacers, 7mm and 14mm. I bought these from a company called Motorsports Technology in Grand Terrace, CA. I paid extra to make them both hubcentric and wheel centric. These are machined from billets of 6061 and are of high quality. I will throw in 20 bolts that are chrome and have the ball shape interfaces. The bolts are all sized for the 14mm spacers, but IIRC, will work fine with the 7mm adaptors as well for the 996...but no guarantee there. I can't remember what I paid for them, but I will sell all four spacers and bolts for $125 (I know I paid significantly more for them than that). Only one has been installed for a test fit, and it snugged up nicely.
I would prefer local pickup so I will wait for a bit before offering shipment option, $SOLD
I can meet someone in LA/Orange county for delivery of any of the above items. Shoot me a PM if you are interested, I will try to get pictures out later tonight.
1) A MKII OEM GT3 bumper, silver. This is an OEM bumper, has black lip splitter. It is currently silver and was off a GT3 with about 12,000 miles on it. It had a clearbra, so it is in good shape and will make for a nice repaint.
Local pickup in Southern Cal., $SOLD
2) A set of 4 used Nitto NT-01 tires. I bought these off another rennlister, and never even installed them. I need the space before I will be able to get them installed and run, so I need to move them. They have around 50% tread left, give or take, and I believe the sizes are 225/40/18 and 275/35/18.
Local pickup in Southern Cal., $SOLD
3) A set of aftermarket long carbon door sills. I bought a set from Maxspeed Motorsports on ebay a while back, but they didn't fit too well. I sent the set back and waited about 3 months for a redesigned version to come in. In the meantime, I bought a set of OEM sills and installed them, so I don't have the need for these anymore. They were damaged slightly in shipping and there is one small visible crack on one of them, I will post pictures later. I didn't feel it was worth sending these back for another set as the damage isn't that bad. I think I paid about $300 shipped, I will sell these for $175 picked up. They really look quite nice. I have a set of "Carrera" stickers to install, but never put them on. As mentioned above, these haven't been installed.
Local pickup in Southern Cal., $SOLD
4) 2 sets of spacers, 7mm and 14mm. I bought these from a company called Motorsports Technology in Grand Terrace, CA. I paid extra to make them both hubcentric and wheel centric. These are machined from billets of 6061 and are of high quality. I will throw in 20 bolts that are chrome and have the ball shape interfaces. The bolts are all sized for the 14mm spacers, but IIRC, will work fine with the 7mm adaptors as well for the 996...but no guarantee there. I can't remember what I paid for them, but I will sell all four spacers and bolts for $125 (I know I paid significantly more for them than that). Only one has been installed for a test fit, and it snugged up nicely.
I would prefer local pickup so I will wait for a bit before offering shipment option, $SOLD
I can meet someone in LA/Orange county for delivery of any of the above items. Shoot me a PM if you are interested, I will try to get pictures out later tonight.
Last edited by bk12; Jul 11, 2008 at 08:51 PM.
Thread Starter
|
Registered User
Joined: Jul 2007
Posts: 138
From: Ohio
Rep Power: 24
Here are some pictures...everything but the spacers and Nittos, and I will get those up later today. The close-up picture of the carbon sill shows the small damage on the one sill.
Thread Starter
|
Registered User
Joined: Jul 2007
Posts: 138
From: Ohio
Rep Power: 24
I had installed another set while waiting for these, but the fitment looks like it would be fine as near as I can tell. I can tell that these don't have the same issue my original set did.
Thread Starter
|
Registered User
Joined: Jul 2007
Posts: 138
From: Ohio
Rep Power: 24
I picked these up used from another Porsche forum member and never even ran them. The previous owner did use them on the track. I don't know about heat cycles...with these and Toyo RA1s, they don't heat cycle out like a set of Michelin Cups, Hoosiers or other slicks do, they seem to run quicker until they cord, which is the beauty of them. I have verified the sizes, and they are 225/40 and 275/35.
