I have seen previous posts by Johny HS and British about replacing the shifter gate cover but have not seen a complete tutorial. If one is out there could you point the way?

I bought the replacement cover for $60 from the eBay lead previously shared by British.

I'm ready to dive in.

Appreciate the assist lads.

 

numerous posts on this topic, start with the one from a month ago:
https://www.6speedonline.com/forums/...one-wants.html

-Larry

 

Thanks - have seen that but those instructions don't provide the first step in how to remove the shifter and wood trim.

 

@Randy V ,
I know I have posted this information somewhere on here, but here are a few tips, if you read the other thread you questioned in, you know to push down and pull up for the ****, as far as the wood trim, see these pictures, gently push back on both armrest while lifting the wood trim as shown in my pictures, PLEASE BE VERY GENTLE...

Johnny

...

 

damn those look tasty! i think i can hear the slurping sound all the way from nj to ohio!

 

Much thanks Johnny - I think I now have enough information to proceed. Wish me luck.

Instruction on first steps to remove wood trim:

https://www.6speedonline.com/forums/...ml#post4842859

Reference other thread with details:

https://www.6speedonline.com/forums/...one-wants.html

 

One other comment -

The small magnets inserted into the bottom of the slider just sit inside the location. They can easily fall out. Others have reported them being installed sideways.

Should I apply a dab of glue to them to secure them in their captive spots?