2011 Bentley Flying Spur Speed
Thread Starter
|
Registered User
Joined: Apr 2024
Posts: 1
Rep Power: 0
2011 Bentley Flying Spur Speed
Hello!
New to this group and have searched through the forum to find a similar experience as mine and I’ve been unable too. Hoping for some input by the community! My Flying spur suspension would start dropping in the rear after sitting for a day or 2. Enough that I would notice and more noticeable on the driver rear side. I decided to send out both rear shocks to be rebuilt my RMT. Upon installation now the passenger rear strut is dropping overnight. Calibration has been done but while the 3 other units read at 396 the passenger rear reads around 370. RMT is suggesting I replace the valve block.
New to this group and have searched through the forum to find a similar experience as mine and I’ve been unable too. Hoping for some input by the community! My Flying spur suspension would start dropping in the rear after sitting for a day or 2. Enough that I would notice and more noticeable on the driver rear side. I decided to send out both rear shocks to be rebuilt my RMT. Upon installation now the passenger rear strut is dropping overnight. Calibration has been done but while the 3 other units read at 396 the passenger rear reads around 370. RMT is suggesting I replace the valve block.
Last edited by Falcon94; Apr 21, 2024 at 02:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Ruggedman
Recall and Technical Service Bulletin (TSB) Information
0
May 29, 2014 06:57 PM