Hey guys. Does anyone know where to find these

clips for the side molding trim pieces on a 2006 Bentley Flying Spur? I had one break on me and none of the universal ones at my local auto store seems to work.

 

Hello @Poloman75 ,
I wouldn't waste your time on trying to obtain the clips, as, they really do nothing as to holding power, they are more of just a guide to align the molding for install.

See this link where the same is discussed, my (silver) GT had both moldings fall off in the car wash, thankfully they had no damage, I came to find out that the clips were not broken, but that the 2-way tape had let go of each molding's surface, as when you look at the backside of each molding you will see the void in the center, therefore the 2-way stuck to the paint because of full contact, whereas on the molding side, just the edges top and bottom length wise, I used 2 layers, 1 cut narrower to fill the void in spots, then a full size to fit the molding, they have been on for over two years now.

Just be sure to use a good 2-way adhesive tape, as the factory thin gray tape stuck well to paint, but not to the stainless steel moldings.

https://www.6speedonline.com/forums/...rome-trim.html

Johnny

 

Thanks so much @Johnny Hotspur GT !