New customer who came in and wanted the entire front end protected with clear bra and have our Diamond Cut IR tint installed. 50% all around and 73% on the windshield for maximum heat rejection and UV protection.
This time around no install photos, just some very close up shots showing the results before it leaves our shop. By the way, the car came down from Oregon with a whole bunch of blue tape on the front. (sorry no pics of that!)
Beautiful day by the way!!!





AS YOU CAN SEE A VERY LARGE DEBRIS NICKED THE FRONT BUMPER HERE ON HIS WAY DOWN THE CALIFORNIA COAST. NOT MUCH WE COULD DO ABOUT THAT

 

Some outdoor shots right here:


full body shots with our Diamond Cut IR

 

Time to update photos of our Diamond Cut IR applied to other vehicles:
Here's a Alpine White M3 Coupe with:
Diamond Cut IR 50% all around and 73% on windshield
Specs again to the film:
1. 94% infrared rejection compared to 75%-80% of ceramic tint
2. 0% metals that impede on wireless transmission signals (especially for BMWs, Audis, and Mercedes for their keyless entry systems)
3. Lifetime Warranty from bubbling, fading, peeling, purpling, and cracking

 

And one of several M3s completed today with our Diamond Cut IR nano-tint

Shade: 73% windshield + 33% sides and rear

Also the entire front end is wrapped with Clear Guard.

 

cars lookin good my friend =)

 

what is the difference between this diamond cut tint and traditional tint? How dark does it go? Thanks.

 

This is another Convertible M3 that we just completed. 63% Windshield / 50% Sides and Rear





AND WE NOW COMPARE DIAMOND CUT IR TINT ON THE M3 TO A NON-TINTED WINDSHIELD OF A GALLARDO.

IN THE M3, THE DASH REGISTERS 94 DEGREES IN 1MINUTE 49 SECONDS COMPARED TO 98 DEGRESS IN 1 MINUTE 16 SECONDS.