For locals that are looking to get vinyl installed on their cars, I can supply both the materials and do the complete installation at my location. The best way to schedule an appointment with me or reach me is via e-mail at donathon@gmail.com

Here's a link to my Facebook Page - Gallery

I am located in Anaheim Hills / Orange County, California. (Note: I do occasionally make trips to Norcal / Bay Area for vinyl installations/work as well, contact me for more info)

For non-locals (or for someone who just wants or needs some materials) and would like to DIY it, I can supply and sell you just the materials to do the installation as well.

Prices varies for both installation and materials depending on the exact car, vinyl finish, and specific part(s) that you want wrapped, so PM or e-mail me (donathon@gmail.com) directly for price quotes.

- Gloss and matte black roof vinyl (other finishes/colors are available upon request)
- Gloss and matte Carbon fiber vinyl
- Black out chrome/brushed aluminum window trim vinyl
- Interior/exterior trim
- Head/tail light tinting
- Full car wraps
- Graphic/vinyl installations
- And More...

I've done installations on hundreds of cars and have supplied materials to thousands of cars worldwide at this point. Here are just one or two quick pictures of the cars and the work that I have personally done for them, just to give you guys an idea of how it looks like and the quality of my work:

Black vinyl roof install:
Before:


After:


Carbon fiber roof install:
Before (hood and roof both originally painted gloss black):


After:


Tinted / smoked lights install:
Before:


After:


Blacked out chrome/brushed aluminum window trim install:
Before:


After:



For a more concise way of viewing specific examples of my work, I have split the more popular types of installations into specific galleries, which you can view in the links below. Even if you may not see something pictured in one of the links below, feel free to contact me directly, as it is very likely that it is still something that I can do or have done in the past.

Facebook Page - Gallery

Gloss and Matte Black Roofs:
Black Roof Vinyl Wrap Pictures - Q&A/FAQ/etc. - E46Fanatics

3M Dinoc and 1080 Carbon Fiber Roofs:
Don Nguyen - Vinyl Carbon Fiber Roof - Picture Thread - E46Fanatics

Smoked/tinted headlights and tail lights:
Smoked/tinted headlights and tail lights? Opinions? - E46Fanatics

Blacked out chrome/brushed aluminum window trim:
Don Nguyen | Blacked Out Window Trim - Vinyl - E46Fanatics

Let me know if you guys have any questions or if you are interested in getting some work done.

thanks.

-Don Nguyen

donathon@gmail.com

 

This specific car is not the typical case of a car coming in with chrome/brushed aluminum trim and wanting me to black out their trim with my vinyl materials. The owner of this BMW E30 M3 brought his car in to have me vinyl wrap the previously painted gloss black trim with my matte black vinyl. I know it may be a bit hard to tell, but if you look at the pictures side by side or back to back it may be easier to notice the differences between how matte black trim vs gloss black trim looks like on a car.

This is also good for those who have asked me in the past how well vinyl will cover up bumps/dents/etc. As you may see in some of the pictures, whoever did the paint job on the trim did not do that good of a job, which left the trim a bit lumpy/uneven. If you can’t see or make it out in the pictures, any imperfections that are underneath the vinyl will show through, as the material is fairly thin and basically takes on the shape of the surface/pieces that they are being applied on over.

Before:






After:














-Don Nguyen

donathon@gmail.com

 

The owner of this white Nissan 350z brought me his car to have me vinyl wrap the roof of the car in my gloss black vinyl material. In addition to the roof, I also did his two side vertical pillars with the 3M dinoc matte carbon fiber vinyl material. I believe the owner of this car was from around Long beach and drove his car out to me in Anaheim Hills/Orange county to get the work done. The gloss black, especially on the 350zs or similar smaller two seater cars, the gloss black roof connects and continues the front and rear glass fairly nicely.

Before:




After:


















-Don Nguyen

donathon@gmail.com

 

I feel like sometime the only cars I do are BMWs, then I go on a stretch not doing any BMWs for a while. Either way, the owner of this silver E46 BMW M3 brought his car in to have me vinyl wrap the roof of his car in my gloss black vinyl material. It was also a nice change of pace to have a non-white colored car come in for some vinyl work done. The owner of this car drove his car to my shop in Anaheim Hills/Orange County to have the work done. I think the gloss black roof on the silver really contrasts and compliments it fairly well.

Before:




After:










-Don Nguyen

donathon@gmail.com

 

I always do enjoy having modified cars come by to have work done on their cars. The owner of this carbon black BMW E39 M5 came by to have me apply my light tint material to his whole tail light. This is the same material/shade that you see me using in all of my previous pictures of tinted tail lights. It may appear slightly lighter on this specific car, but that’s because on darker colored cars (IE black, dark grey, etc) the contrast between the tint shade and the car is not as big, so it’ll appear lighter than it does on lighter colored cars (IE white, silver, etc). He drove out to me in Anaheim Hills/Orange County to have the vinyl work done.

Before:




Left/driver side tinted - Right/passenger side stock:


After:










-Don Nguyen

donathon@gmail.com

 

I always take requests, if anyone is trying to look for a specific example of my vinyl work on a certain type of color or car. In this case, I had someone ask me if I could post pictures of blacked out window trim on a red colored car. The owner of this red Audi S5 had me black out his chrome/brushed aluminum window trim with my matte black vinyl material. I believe the owner of this car was from Los Angeles and drove out to me in Anaheim Hills/Orange County to have the work done. I think the matte black provides a nice contrast with the bright color of the car, but I think gloss black would have looked just equally as good in this case.

Before:






After:






Note: The bump that can be seen on the top rear quarter window trim piece is a factory bump/seam and not due to any installation reasons/issues.








-Don Nguyen

donathon@gmail.com

 

This picture set is a lot shorter than what I normally post, but I get a lot of requests for pictures of carbon fiber wrapped front lips. The owner of this white Mercedes CLA sedan came by to have me wrap the back 1/3rd of his roof in gloss black, to complete the panoramic look of his car. In addition to the roof, he also had me wrap the front lip of his car int he 3M 1080 gloss carbon fiber vinyl material. Due to the size of his front lip, I had to do it in three different pieces/sections. I decided to make two seam lines that lined up/matched two edges of the bumper’s lower grill. Unfortunately, due to how late it was when the owner of this car came, it became dark very quick and it was hard to photograph pictures of the car once it was done with the lighting that was available inside. The owner of this car drove to me in Orange county/Anaheim Hills from Los Angeles to have the work done.

Before:




After:




-Don Nguyen

donathon@gmail.com

 

For this white Audi A6 sedan, I vinyl wrapped the roof in my gloss black vinyl material and also lightly smoked/tinted the tail lights of his car. I liked the way this turned out, because the changes with the gloss black roof and lightly tinted tails really gave the car a different look without making it look too modified. If you didn’t know or didn’t look very closely, most would probably have thought it came from the factory like this. The owner of this car brought his car out to me in Anaheim hills/Orange county to have the vinyl work done.

Before:






After:














-Don Nguyen

donathon@gmail.com

 

For this white Audi A6 sedan, I vinyl wrapped the roof in my gloss black vinyl material and also lightly smoked/tinted the tail lights of his car. I liked the way this turned out, because the changes with the gloss black roof and lightly tinted tails really gave the car a different look without making it look too modified. If you didn’t know or didn’t look very closely, most would probably have thought it came from the factory like this. The owner of this car brought his car out to me in Anaheim hills/Orange county to have the vinyl work done.

Before:






After:














-Don Nguyen

donathon@gmail.com

 

For this white Audi A6 sedan, I vinyl wrapped the roof in my gloss black vinyl material and also lightly smoked/tinted the tail lights of his car. I liked the way this turned out, because the changes with the gloss black roof and lightly tinted tails really gave the car a different look without making it look too modified. If you didn’t know or didn’t look very closely, most would probably have thought it came from the factory like this. The owner of this car brought his car out to me in Anaheim hills/Orange county to have the vinyl work done.

Before:






After:














-Don Nguyen

donathon@gmail.com

 

I know the before/after differences may not show up well in the pictures, but for those who own these cars and are familiar with it, I am sure you can see/notice the differences. The owner of this white Lexus IS250 brought in his car to have me apply a clear red transparent film over the orange amber portion of his tail lights. This gives the tail lights a nice consistent red tone/finish to the entire tail light, without having the random orange amber break up the tail light’s lines. In addition to the tails, I also applied a clear transparent yellow film to his head lights. I typically use the yellow for fog lights, but I have had quite a few requests for the yellow to be applied on head lights in the past and lately.

Before:


After:














-Don Nguyen

donathon@gmail.com

 

The owner of this new jet black Lexus IS250 sedan had me vinyl wrap the chrome/brushed aluminum window trim. The blacked out trim makes a huge difference on dark colored cars, as you can see in the pictures below. For this car, we went with the gloss black vinyl finish for the material, to have the window trim of the car blend in with the black paint on the car. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done.


Before:






After:








-Don Nguyen

donathon@gmail.com

 

The owner of this car was from out of state and brought in his car to me in Orange County/Anaheim Hills to get some vinyl work done on it. He had me vinyl wrap the roof in the 3M dinoc matte carbon fiber finish and also had me light smoke/tint his rear tail lights on his white BMW 128i coupe. The owner of this car was trying to replicate the look that the M3 E92 coupes have on roofs stock carbon fiber from the factory. This is as close as you’re going to get to that effect/look without actually changing out the entire roof.

Before:






During: Driver/left side tinted/smoked - passenger/right side stock


After:














-Don Nguyen

donathon@gmail.com

 

This is a previous car that I had worked on. The owner of this white VW Golf R sedan had me vinyl wrap his roof in the 3M matte carbon fiber vinyl about a year. He came back because he wanted me to wrap his side window pillars and mirrors in the same 3M matte carbon fiber material. Note - Typically it is not practical or possible to wrap mirrors, due to their shape/curves, but it worked out in this case due to the design of the mirrors on this car. Most mirrors that you see wrapped in pictures are either done in multiple pieces or only show how it looks like right after it is wrapped, which doesn’t show how it holds up over time.

Before:




After:














-Don Nguyen

donathon@gmail.com

 

The owner of this car was from Irvine as well and brought their car to me in Anaheim Hills/Orange County to have me vinyl wrap their brand new white Lexus IS350 sedan. I did the roof in my gloss black vinyl material. In addition to the roof, I also did the body line in the rear right under the tail light in the same gloss black as well as right under the front head light, between the headlight and turn signal in the bumper, with gloss black as well. It was interesting doing something different/custom on this car, although it may not be most people’s style.

Before:




After:












-Don Nguyen

donathon@gmail.com