PCM 4.0 Back up Camera activation. - 6SpeedOnline - Porsche Forum and Luxury Car Resource

Jun 13, 2023 | 06:16 AM

vartech

Thread Starter

Registered User

Joined: Oct 2022

Posts: 18

Rep Power: 0

Backup Camera Error U111100 Communication error after OEM retrofit.

I retrofitted a OEM 95B.980.551.L using a wiring harness from Aliexpress I connected from the camera ther following Can High to connector E on PCM pin 6 Can low to pin 12. Camera to Connector B pin 6 and 12. Ground to trunk and power to fuse box. PIWIS sees camera module and it shows when I place car in reverse. it shows power voltage at 14.2. PIWIS states camera needs calibration only fault on module. I read on a different forum that should not stop camera from working. On the PCM I get the communication error in PIWIS under faults. Nothing changes on PCM when I put car in reverse. Is my Camera bad? is there something I am missing? I did add back up camera to PCM in PIWIS

Last edited by vartech; Jul 3, 2023 at 07:52 AM. Reason: adding info