Porsche Front Disks

PFC Porsche Two Piece Floating Hat and Rotor Assembly
Applications: Models 01-05 996 (911) GT2 and GT3 (w/ iron rotors identical in dimensions to ceramic) *Must be used with PFC Pads


Porsche Front Pads

PFC Porsche Front, Race Ready, 97 Compound Pads
Applications: Models 01-05 996 (911) GT2 and GT3 also fits Models 02-05 996 (911) GT3 Cup


Porsche Rear Pads

PFC Porsche Rear, Race Ready, 97 Compound Pads
Applications: Models 01-05 996 (911) GT2 and GT3 also fits Models 02-05 996 (911) GT3 Cup


Porsche Brembo Pads

PFC Porsche Brembo F40 Caliper, Race Ready, 97 Compound Pads



For pricing or to place an order, please visit our website at www.mbsbrakes.com

 

Good brakes. I got mine from local dealer to replace the PCCBs. Excellent feedback and selection of pads available! Here's my picture.

 

Nice!

 

Only 996? What about 997?

Can these be used with OEM calipers?

 

Fits 997 GT3 Front, 06-08 Non PCCB

Thank you

 

What is the cost for the front and rear conversion from PCCB to your setup? What is the weight gain?
This is a beautiful setup to say the least!

 

The PFC front disks are 21 lbs. each which is the lightest we are aware of. Our current price is $508.73 each. PFC does not currently offer the rear disc as the stock units held up much better than the fronts, however with enough interest we could convince them to make them.

For pad description and pricing please see our store @

http://shop.motorsportbrakespecialis...?categoryId=13

Thanks

 

My biggest issue is that I would love to try the rotors but don't want to use PF pads. Nothing against the pads, just content with Pagids. Don't understand why PF makes the hats on the rotors so big that only their (smaller surface area) pads will work. Rotors look fantastic, and seems to be the most affordable 2piece rotors out there, but since I go thru at least 3 or 4 sets of rotors a year, I just buy the very heavy, one piece, slotted rotors available from some other vendors

 

I have heard there is a Pagid pad that fits. Unfortunately I do not have a reference.

Pad dimensions can be found here:

http://www.performancefrictionbrakes...ls.php?id=7819

Thanks,

 

Replacement rotor and hardware for the above pictured assembly, $ 286.43

 

PM me for Rotor and Pad package pricing.

Thanks!

 

I now have 997 rear pads. PM me for details.

Thank you!

 

I run PF01 and 97 pads now with their front rotors. I came from Pagid yellow's and they are very similar. You wouldn't know you switched and would gain the benefit of their very good rotor package. I would give it a try, I bet you get more use of that package and would need to replace them less frequently. It's too cheap not to try it out IMO

 

Do they fit also on a 997 GT2 ? I have a friend that is looking for a replacement solution for months for his PCCB on the GT2. PCCB were toasted after less than 3,000km of track usage...

 

These do not fit 997 PCCB's, which are 380mm. They have started the design, but we will need demand to have them produced.

Thanks.