New Product Release Agency Power Muffler Delete GT3
Registered User
Joined: Jul 2008
Posts: 594
From: Baton Rouge, La.
Rep Power: 49
-Troy
Last edited by Glock Guru; May 14, 2012 at 10:07 PM.
Registered User
Joined: Dec 2005
Posts: 752
From: Gualala, Ca.
Rep Power: 96
A bunch of whiney little bit***s. I'm glad the wheel guys don't complain about each other copying their round 20" tire mounts. Lately, reading threads of one group of posters pouncing on one other poster is getting a little tiresome. But, I'm sure a few more people can pile on here before it gets really ugly.
There is a long history of plagiarizing surrounding these saps
Registered User
Joined: Jul 2008
Posts: 594
From: Baton Rouge, La.
Rep Power: 49
Can't we all just get along? Why can't we work out our differences? Hope and change is here, YA HOO!!! Everybody is a winner,
-Troy
-Troy
Last edited by Glock Guru; May 15, 2012 at 10:14 AM.
Registered User
Joined: May 2010
Posts: 25
From: Phoenix, AZ, USA
Rep Power: 18
ahh, well, in this case I think it should be "Why can't we work out our similarities..." all products can look the same, no matter where they come from... what's wrong with that... yes, everybody is a winner. In the meantime, I think they are searching online for a press release that they can copy too.
Registered User
Joined: Nov 2008
Posts: 431
From: Reno NV
Rep Power: 59
Ah, I have missed 6Speed. No...wait a minute, I haven't! 
Sharkwerks integrity is beyond reproach, they earned my respect many times over. Great folks.
Interesting how so many vendors that post here don't post on the RennList GT3 forum? Wonder why that is? Hmmmm
I know the Sharkfolk have always been welcome there 
Sharkwerks integrity is beyond reproach, they earned my respect many times over. Great folks.
Interesting how so many vendors that post here don't post on the RennList GT3 forum? Wonder why that is? Hmmmm
I know the Sharkfolk have always been welcome there
Registered User
Joined: Jan 2007
Posts: 10,774
From: OR Room 5
Rep Power: 1007
^
For the record, IB (and to some degree the mods) have been involved in this - and have made policy changes as a result. This forum will be changing how it handles these types of threads. In the past, all of these threads were removed or closed, usually by request of the vendor/OP. As long as civility exists, these types of threads will remain open for people to review and discuss openly. Members can judge the vendor and decide for themselves.
For the record, IB (and to some degree the mods) have been involved in this - and have made policy changes as a result. This forum will be changing how it handles these types of threads. In the past, all of these threads were removed or closed, usually by request of the vendor/OP. As long as civility exists, these types of threads will remain open for people to review and discuss openly. Members can judge the vendor and decide for themselves.
Last edited by bbywu; May 24, 2012 at 09:31 PM.
Banned
Joined: Jan 2010
Posts: 278
From: Florida
Rep Power: 39
^
For the record, IB (and to some degree the mods) have been involved in this - and have made policy changes as a result. This forum will be changing how it handles these types of threads. In the past, all of these threads were removed or closed, usually by request of the vendor/OP. As long as civility exists, these types of threads will remain open for people to review and discuss openly. Members can judge the vendor and decide for themselves.
For the record, IB (and to some degree the mods) have been involved in this - and have made policy changes as a result. This forum will be changing how it handles these types of threads. In the past, all of these threads were removed or closed, usually by request of the vendor/OP. As long as civility exists, these types of threads will remain open for people to review and discuss openly. Members can judge the vendor and decide for themselves.
thank you !
That is all I have to say Made (aka copied) in the US indeed
http://www.greatexportimport.com/s-j...ookieSupport=1
Made (aka copied) in the US indeedhttp://www.greatexportimport.com/s-j...ookieSupport=1
Banned
Joined: Jan 2010
Posts: 278
From: Florida
Rep Power: 39
That is all I have to say Made (aka copied) in the US indeed
http://www.greatexportimport.com/s-j...ookieSupport=1
Made (aka copied) in the US indeedhttp://www.greatexportimport.com/s-j...ookieSupport=1
I feel your pain, but unfortunately there is absolutely nothing that we can do.
I choose not promote sell, install or use this kind of products myself.
One reason why I do not offer promote or sell center muffler delete is because of Sharkwerks.
I believe there is a share for everyone of us and at the end of the day all 'fair' players will keep moving forward.
Registered User
Joined: Jun 2007
Posts: 778
From: Livermore>Fremont, CA
Rep Power: 204
Exposed!
No matter how you say it will always be
قمامة
垃圾
Müll
ごみ
lixo
ขยะ
мусор
No matter how you say it will always be
قمامة
垃圾
Müll
ごみ
lixo
ขยะ
мусор
That is all I have to say Made (aka copied) in the US indeed
http://www.greatexportimport.com/s-j...ookieSupport=1
Made (aka copied) in the US indeedhttp://www.greatexportimport.com/s-j...ookieSupport=1
Registered User
Joined: Jul 2003
Posts: 15,575
From: Los Angeles, CA
Rep Power: 682
The facts are I have an Email/order from you on 1/25/12 that says:
Can I buy a GT3 4.0L muffler bypass for a local customer.
Dan Mermelstein
Vivid Racing
Tel: 480.966.3040 x222
Web: www.vividracing.com
Is there a diagram, a jig/fixture anything? It just so happened to come out exactly like ours did? The Shark Werks exhaust looks like so:
As far as R&D goes one can only assume from this that you subscribe to the "rip off and distribute" school of thought judging from your checkered history. Agency Power has already "R&D'd" the EVO BRV's, the Tubi 997.2 Exhaust and the list keeps growing. I imagine it will catch up to you.
As I said before to you many times if you get stuff like this knocked-off and made cheaply in the far east you can expect the welds to fail.
Sorry 6speeders but anyone that mentions this post we'll be sure to discount for you and include an American flag for you to wave. Try to buy the real thing or at least one of the other real options.
Here it is again for you in case you haven't seen the real thing:
Anyways, I wanted to thank the 6speeders (the ones that post and who don't) for bringing this to my attention and for the support over the years.
Can I buy a GT3 4.0L muffler bypass for a local customer.
Dan Mermelstein
Vivid Racing
Tel: 480.966.3040 x222
Web: www.vividracing.com
Is there a diagram, a jig/fixture anything? It just so happened to come out exactly like ours did? The Shark Werks exhaust looks like so:
As far as R&D goes one can only assume from this that you subscribe to the "rip off and distribute" school of thought judging from your checkered history. Agency Power has already "R&D'd" the EVO BRV's, the Tubi 997.2 Exhaust and the list keeps growing. I imagine it will catch up to you.
As I said before to you many times if you get stuff like this knocked-off and made cheaply in the far east you can expect the welds to fail.
Sorry 6speeders but anyone that mentions this post we'll be sure to discount for you and include an American flag for you to wave. Try to buy the real thing or at least one of the other real options.
Here it is again for you in case you haven't seen the real thing:
Anyways, I wanted to thank the 6speeders (the ones that post and who don't) for bringing this to my attention and for the support over the years.
