FS A Like-New Vertical Mill for all those DYS Projects
#1
11-06-2006, 03:16 PM
Join Date: Sep 2006
Location: Duluth, GA
Posts: 1,143
Rep Power: 73 
FS A Like-New Vertical Mill for all those DYS Projects
I bought this milling machine new about 3 years ago to build some guns and do other gunsmithing, but never got around to doing much with it. It would be great for a home shop where someone needed to make intricate one-off pieces or beautiful mounting brackets, flanges, etc. The digital read out is very accurate and measures to the nearest 1/10,000 of an inch. It is large enough to take a healthy cut without any chatter. The machine weighs 1560 pounds without the vice and the rotary table.
It is sitting in my garage where I just moved it today from my old house
and is still secured on an engine hoist. It is a very simple matter to roll it onto a truck that has a power lift gate. If someone has need, I will sell the engine hoist too (purchased new for this moving project) for an additional $225.
It took 3 of us today to maneuver it onto and off of the Penske truck, which, by the way rented for $59/day and $0.59 per mile.
Check the internet and see what you would have to pay for this equipment if purchased now, and you will see that this is very good pricing.
Jet JVM-836 Vertical Milling Machine with 8 X 36 Table, Power Feed, and
Newall 3-axis Digital Read Out
The mill and most of the accessories were purchased new 3 years ago and are in excellent condition. The only dings
are those occurring while it has been twice moved.
Some of the options have never been used.
The mill has about 10 hours of use.
Options include:
Jet TPFA-2X Power Table Feed X-Axis
Newall G80300/2Q06 3-Axis Digital Readout 30 X 12 X 6
Newall FX00RDM Adjustable Mounting Arm
Kurt MLV-6X 6” Lockdown Machine Vice
Phase II 8” Horizontal/Vertical Rotary Table
Koolmist 1 Gallon Flex Mist System
Halogen Swivel Mount Machinist Light with Mount
CK 12 Clamp Kit
CP 130-R8 Keyless Drill Chuck
3-Piece Set of Flycutters
Set of R-8 Collets
Collet Holder for R-8
24 Piece 5C Collet Fixture Set With Box and Holder
21 Piece Side/End Mill Set With Wooden Block Holder
Assorted Sizes Of Cutters and Mills Over 60 Additional Pieces
$4,900.00 for all.
Al Norton
770-401-0102 cell
678-957-8877 home
DrNorton@AtlantaLaserDentistry.com
I AM ON USA EASTERN STANDARD TIME
Please help me with my Porsche fund.
I am going to try to load some pictures, but I can't seem to make them very large, so if you want bigger images, please double click on them.
This last photo shows it still secured to the engine hoist and ready to load onto someone's truck.
It is sitting in my garage where I just moved it today from my old house
and is still secured on an engine hoist. It is a very simple matter to roll it onto a truck that has a power lift gate. If someone has need, I will sell the engine hoist too (purchased new for this moving project) for an additional $225.
It took 3 of us today to maneuver it onto and off of the Penske truck, which, by the way rented for $59/day and $0.59 per mile.
Check the internet and see what you would have to pay for this equipment if purchased now, and you will see that this is very good pricing.
Jet JVM-836 Vertical Milling Machine with 8 X 36 Table, Power Feed, and
Newall 3-axis Digital Read Out
The mill and most of the accessories were purchased new 3 years ago and are in excellent condition. The only dings
are those occurring while it has been twice moved.
Some of the options have never been used.
The mill has about 10 hours of use.
Options include:
Jet TPFA-2X Power Table Feed X-Axis
Newall G80300/2Q06 3-Axis Digital Readout 30 X 12 X 6
Newall FX00RDM Adjustable Mounting Arm
Kurt MLV-6X 6” Lockdown Machine Vice
Phase II 8” Horizontal/Vertical Rotary Table
Koolmist 1 Gallon Flex Mist System
Halogen Swivel Mount Machinist Light with Mount
CK 12 Clamp Kit
CP 130-R8 Keyless Drill Chuck
3-Piece Set of Flycutters
Set of R-8 Collets
Collet Holder for R-8
24 Piece 5C Collet Fixture Set With Box and Holder
21 Piece Side/End Mill Set With Wooden Block Holder
Assorted Sizes Of Cutters and Mills Over 60 Additional Pieces
$4,900.00 for all.
Al Norton
770-401-0102 cell
678-957-8877 home
DrNorton@AtlantaLaserDentistry.com
I AM ON USA EASTERN STANDARD TIME
Please help me with my Porsche fund.
I am going to try to load some pictures, but I can't seem to make them very large, so if you want bigger images, please double click on them.
This last photo shows it still secured to the engine hoist and ready to load onto someone's truck.
Thread
Thread Starter
Forum
Replies
Last Post
Studio RSR
Maserati Vendor Classifieds
4
11-10-2015 07:25 PM
Studio RSR
Lamborghini Vendor Classifieds
4
11-10-2015 07:25 PM
Studio RSR
Lamborghini
6
11-10-2015 07:00 PM
Pharris409
Automobiles For Sale
11
11-01-2015 06:57 AM
