WTB: Adjustable Rear Link Kit (Dogbones)
#1
05-29-2011, 07:53 PM
Join Date: Jun 2006
Location: Toronto, Dubai, Kuwait & Bombay
Age: 38
Posts: 2,941
Rep Power: 213 
WTB: Adjustable Rear Link Kit (Dogbones)
Category: Steering & Suspension
Price: $0
Private or Vendor Listing: Private Listing
Location (State): Can-ON
Item Condition: Used
RSS
GMG
ERP
TRG
TARRET
AGENCEY POWER
TORQUE SOLUTIONS
Any Brand will do, as long as its good
Last edited by Zookie; 07-31-2011 at 09:20 PM.
#2
05-30-2011, 08:08 AM
Registered User
Join Date: Jun 2010
Location: Central Valley, CA
Posts: 278
Rep Power: 26
I just purchased a set from Alex at Sharkwerks. I realize you are probably trying to find a used set but keep him in mind. The fit and finish was great.. Good luck in the search.
!
Trending Topics
#10
08-18-2011, 10:58 AM
early_grayce in the Rennlist Member to Member For Sale section
Tarett Rear Toe Control Arm for 996/997/986/987- new in-box
As the title says, I have a pair of Tarett Rear Toe Control Arms for 996/997/986/987. Comes with the locking plate kit.
Brand new, still in the original box.
Asking: $425 plus shipping
As per Tarett web site:
FEATURES:
Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can’t compensate enough when lowering your 996/997, Cayman or Boxster, leaving you stuck with as much as ½” of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed.
The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm.
A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. The result is improved stability and control.
The complete kit comes as shown, including new Porsche outer tie rods. These are the aftermarket toe control arms that have been exclusively certified for BSR & 996 Spec racing.
Locking plate kit:
This bolt on kit will help put an end to continuously needing to realign your 996/997 or 993 rear suspension.
The factory adjustment cams slip under heavy loading, resulting in alignment changes. These locking plates replace the problematic cam adjusters, and will precisely and positively lock the inboard end of the toe control arm in place.
All necessary hardware is provided in zinc plated metric class 8.8.
__________________
Rob M.
BOHICA racing team member
Tarett Rear Toe Control Arm for 996/997/986/987- new in-box
As the title says, I have a pair of Tarett Rear Toe Control Arms for 996/997/986/987. Comes with the locking plate kit.
Brand new, still in the original box.
Asking: $425 plus shipping
As per Tarett web site:
FEATURES:
Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can’t compensate enough when lowering your 996/997, Cayman or Boxster, leaving you stuck with as much as ½” of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed.
The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm.
A precision Teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. The result is improved stability and control.
The complete kit comes as shown, including new Porsche outer tie rods. These are the aftermarket toe control arms that have been exclusively certified for BSR & 996 Spec racing.
Locking plate kit:
This bolt on kit will help put an end to continuously needing to realign your 996/997 or 993 rear suspension.
The factory adjustment cams slip under heavy loading, resulting in alignment changes. These locking plates replace the problematic cam adjusters, and will precisely and positively lock the inboard end of the toe control arm in place.
All necessary hardware is provided in zinc plated metric class 8.8.
__________________
Rob M.
BOHICA racing team member
#11
09-24-2011, 10:06 AM
Have 1 set of lightly used Dogbones in stock from a customer who went back to stock to sell his car.. Never tracked with them just used to get the camber correct.. less than 2000 miles.. PM me if interested.. Thanks!!
#12
09-27-2011, 04:35 PM
Join Date: Jun 2006
Location: Toronto, Dubai, Kuwait & Bombay
Age: 38
Posts: 2,941
Rep Power: 213
Got Some!!! Thank You AWD Motorsport!
#14
09-27-2011, 05:25 PM
Join Date: Jun 2006
Location: Toronto, Dubai, Kuwait & Bombay
Age: 38
Posts: 2,941
Rep Power: 213
awesome thanks!! but i wont be installing it till next summer... soon i will be getting my car in Winter Mode :P
#15
09-28-2011, 07:14 AM
Rear adjustable dog bones
Very interested please email me!
Thanks,
Paul
Stype1990@aol.com
Thanks,
Paul
Stype1990@aol.com
Thread
Thread Starter
Forum
Replies
Last Post
r_matt_6
Automobiles For Sale
11
10-08-2015 06:07 PM
AJUSA.com
997 Vendor Classifieds
4
10-08-2015 05:50 PM
