Hi, i just purchased a gt3/gt2 yellow caliper set 6 piston for the front and 4 piston for the rear i am planning on power coating them red (have a black car) and if anybody is interested in trading the same in red for yellows could work out for both of us. these have only 6k on them would need same good condition. thanks Greg

 

i have a set of reds on my TT

pm me

 

Gt3 fronts are bigger than TT fronts.

 

thanks but i have the stock tt brakes and am upgrading to gt3

 

I have several requests for photos and cant seen to load so send me your e-mail address and i will forward them.

 

GT2/3 front calipers have different mounting to the suspension carreiers. caliper, pads will not work with the rotors.

 

OAT, i purchased the rotors and calipers, this is the same set-up that kevin is selling for the tt brake upgrade.

 

Not sure if they're the same but these are very nice setups Link

 

those must be from a 996tt s version (front). the front GT2/3 caliper will not simply bolt up to the 996tt carriers and fit correctly with the larger rotors. not sure if the construction and specs are the same. I would assume so, kevin would know. I have changed out my suspension carriers to accomodate the calipers from an GT2/3. At the time I did my conversion the 996tt S was not available.

 

The 6-piston calipers are available only in yellow. Any reds you will find for trade are 4-piston. So your choices are: powdercoat, paint or learn to love the yellow.

 

what about the GT3 6 piston calipers for steel?

 

The original post was to see if somebody with GT3 calipers wanted to trade red for yellow.....

 

Read it again.

 

Yellow, but please correct me if I'm wrong (like anyone here would hesitate!).

 

my response was mainly for the 996tt guys that were interested in buying or planning on just swapping calipers they will not fit correctly.