V1 Hardwire for 997 GT3 / DIY or installer
#1
V1 Hardwire for 997 GT3 / DIY or installer
Anyone know where I can get the V1 hardwired in the GT3 near Redondo Beach?
I was about to do it myself tell I took off the map light console and also to find out the V1 only came with a 10ft wire and not a short one. The fuse is also bulky and there is no space to tuck this away without it being noticable.
Messing with the electronic is not one of my favorites in these cars and dont want mess with it.
TIA
I was about to do it myself tell I took off the map light console and also to find out the V1 only came with a 10ft wire and not a short one. The fuse is also bulky and there is no space to tuck this away without it being noticable.
Messing with the electronic is not one of my favorites in these cars and dont want mess with it.
TIA
#2
If you want it done right, take it to your dealer. I got mine done at my dealer and they told me that tapping into the map light or the fuse box is a quick fix. They tapped into the ac outlet on the passenger side.
#4
#5
I didnt want to pull down too hard and break something, I can only geta a release on the windshield side but not the other side.
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
997 Vendor Classifieds
0
08-20-2015 02:39 PM
PelicanParts.com
997 Turbo Vendor Classifieds
0
08-20-2015 02:38 PM
PelicanParts.com
GT3/GT2/GT Vendor Classifieds
0
08-20-2015 02:37 PM