6SpeedOnline - Porsche Forum and Luxury Car Resource
One light done, other not
One light done, other not
0 2022/09/11 14:28:11
0 2021/09/06 13:02:55
0 2021/09/06 13:02:54
0 2021/09/06 09:21:55
0 2021/09/06 09:16:47
Groups
Groups
0 2021/09/06 09:16:46
0 2021/09/06 09:10:27
0 2021/07/18 13:19:49
0 2021/07/12 12:35:05
0 2021/07/12 12:30:45
0 2021/07/12 12:30:30
0 2021/07/12 12:29:26
0 2021/07/12 12:28:19
0 2021/07/12 12:26:06
0 2021/07/12 12:25:00
0 2021/07/12 12:21:39
Haha, Frank....Here is the Chrysler
Haha, Frank....Here is the Chrysler
0 2021/07/12 11:22:23
0 2017/03/01 08:52:32
Then you have to vacuum out the AC system using a vacuum pump for 45 min or so. After that put a little less than 2 twelve oz cans of R134 into the system.
Then you have to vacuum out the AC system using a vacuum pump for 45 min or so. After that put a little less than 2 twelve oz cans of R134 into the system.
0 2017/02/27 13:43:12
Lifting the radiator assembly into place. It was a little tricky getting all those quick connect radiator hoses to actually click into place
Lifting the radiator assembly into place. It was a little tricky getting all those quick connect radiator hoses to actually click into place
0 2017/02/27 13:43:06
After everything is put together, it is time to recharge the AC system. First, inject just 1 oz or so AC compressor oil. When removing the AC radiator, you only lose the oil in the lines and not much more. The rest of the compressor oil is still inside the AC compressor.
After everything is put together, it is time to recharge the AC system. First, inject just 1 oz or so AC compressor oil. When removing the AC radiator, you only lose the oil in the lines and not much more. The rest of the compressor oil is still inside the AC compressor.
0 2017/02/27 13:42:58
Buff the lenses. I started with 1200 grit sand paper. Then 1500, and finally 2000 grit
Buff the lenses. I started with 1200 grit sand paper. Then 1500, and finally 2000 grit
0 2017/02/27 12:44:29
First, use masking tape, protecting the paing
First, use masking tape, protecting the paing
0 2017/02/27 12:44:23
Here is what my hazy lights looks like before
Here is what my hazy lights looks like before
0 2017/02/27 12:44:18
0 2017/02/27 12:44:13
0 2017/02/27 12:44:08
After sanding the lenses looks REALLY hazy. No worries though. After applying rubbing and polishing compounds, the lenses will look like new again
After sanding the lenses looks REALLY hazy. No worries though. After applying rubbing and polishing compounds, the lenses will look like new again
0 2017/02/27 12:44:02
Here we go. The engine is put back in to the car.
Here we go. The engine is put back in to the car.
0 2017/02/12 17:47:50
Having to roller carts like these are invaluable when installing the engine. Not only can you move the, you can also lower/raise them
Having to roller carts like these are invaluable when installing the engine. Not only can you move the, you can also lower/raise them
0 2017/02/12 17:47:07
I was having some trouble aligning the secondary engine mounts to the chassis. Rigged this up, do I can move the engine just enough for the bolts to alight.
I was having some trouble aligning the secondary engine mounts to the chassis. Rigged this up, do I can move the engine just enough for the bolts to alight.
0 2017/02/12 17:46:21
Smother the rollers with CV grease and fill the casing and boot with the rest of the CV joint grease supplied in the kit. Then install and tighten the clips on the boot and you are done. Easy Job when you have all the right tools :)
Smother the rollers with CV grease and fill the casing and boot with the rest of the CV joint grease supplied in the kit. Then install and tighten the clips on the boot and you are done. Easy Job when you have all the right tools :)
0 2017/02/10 06:52:52
Install the new boot,, big spring clip and use a socket like this to tap the rollers into place, so you can install the inner spring clip
Install the new boot,, big spring clip and use a socket like this to tap the rollers into place, so you can install the inner spring clip
0 2017/02/10 06:50:24
Here is a picture of the flat inner side.
Here is a picture of the flat inner side.
0 2017/02/10 06:49:57
Note: the roller spline has two sides. Here a picture of the beveled side. This side faces outward toward the wheels when installed again
Note: the roller spline has two sides. Here a picture of the beveled side. This side faces outward toward the wheels when installed again
0 2017/02/10 06:48:42
Remove the outer spring clip (the thicker clip), then the rest the CV boot. Clean everything thoroughly afterwards.
Remove the outer spring clip (the thicker clip), then the rest the CV boot. Clean everything thoroughly afterwards.
0 2017/02/10 06:47:16
Remove the spring clip and then the rollers
Remove the spring clip and then the rollers
0 2017/02/10 06:46:42
Use a hammer to knock out the casing from the rollers.
Use a hammer to knock out the casing from the rollers.
0 2017/02/10 06:45:55
0 2017/02/10 06:41:56
0 2017/02/10 06:38:47
I picked these Walker direct replacement sensors instead of the Bentley ones, saving over $500
I picked these Walker direct replacement sensors instead of the Bentley ones, saving over $500
0 2017/02/05 15:09:24