Year: 2011
Make: Lamborghini
Model: Gallardo
Price: $219984
Mileage: 11600
Color: Orange / Arancio Borealis
Private or Dealer Listing: Private Listing
Location (State): TX
Transmission: Automatic
Drivetrain: 4WD & AWD

Edited for New Price: $219,984

Car listing: http://bit.ly/1R5qb5J

More pics: https://hybred.smugmug.com/Photoshoots/JHB/


I consigned the car at Lamborghini Houston. Just did the 5 year service, oil change, fuel injector flush, diff, brake flush etc etc etc. Car is ready to race! Stage 3 egear with Race Heads, Quickshift and Brake Boost. 1250hp on MS109, dyno was 1150+ on pump. New clutch May 2014. Brand new ADV1 wheels and new Toyo R888 tires.

 

That's just sick! Good luck with the sale. My dream is to have a UGR car one day.

 

Thanks!

 

Perfect setup in a gorgeous Lambo

GLWS!!

 

Here are the details on the build, which was $130k on top of the car:

Underground Racing STAGE 3 Twin Turbo System
1,000+ WHP using Pump Gas
1,250+ WHP using Race Gas
- Custom twin billet 67mm turbochargers
- Tial billet wastegates
- Tial billet blow off valves
- Custom fabricated stainless steel 3.5" exhaust using aircraft quality metal
- Ultra lightweight stainless steel mufflers
- Exhaust Finish Options: high temp heat coating or polished mirror finish
- Custom fabricated stainless steel air induction using aircraft quality metal
- K&N air filters
- High quality silicone hose
- High pressure T-bolt clamps for intake pressure tubes
- High quality v-band clamps for exhaust connections
- Custom heat shielding and high quality heat wrap
- Custom Air/Water intercooler system with high flow water pump
- High flow intercooler water heat exchanger
- Custom ice water reservoir
- Underground water reservoir top
- Show quality polishing on turbo compressor, intercooler and charge piping.
- Crankcase ventilation system
- Race Heads

Underground Custom Billet Short Block
- Full blue print and balanced race short block
- Carrillo billet rods
- CP custom reverse dish race pistons
- CP spiral locks
- CP .180+ wall wrist pins
- CP oil rail support
- Custom steel cylinder sleeves
- Main bearings
- Rod bearings
- Total seal TNT file fit rings

Fuel System
- Two custom billet fuel pump hangers with high flow fuel pumps
- Custom aluminum fuel rails
- All Aeroquip stainless steel fuel line and aluminum fittings
- Aeromotive adjustable fuel pressure regulator
- Upgraded fuel injectors

Tuning
- Engine Management System
- Electronic boost controller
- Custom wiring harness
- Professional dyno and streetability tuning

MoTeC
- MoTeC Engine Management System
- Custom wiring harness
- Boost By Gear

Clutch
- Ceramic clutch, pressure plate and flywheel

Transmission
- Quickshift Upgrade

Wheel & Tires
- ( 4 ) New Toyo Tires R888
- New ADV1 Wheels
- Lowering

 

So gorgeous. Maybe some day. Best of luck!

 

Any idea if UGR cars can pass CA emissions?

 

It can pass an ODBII inspection here in Texas. I'm told by California drivers that their cars pass ODBII as well.

 

To answer some questions I got backchannel:

The wheels are new ADV1 6685s and look like this: http://adv1wheels.com/gallery/newbor...heels-audi-r8/

 

Just to help you out further and give this thread a quick little bump - these are ADV10 MV2's. Custom Forged 2-piece wheels. Inner barrel finished in Gloss Gunmetal and the outer in Brushed Aluminum with a Clear Coat. Beautiful spec and good luck with the sale.

 

Thanks!

 

Price reduced to $209k for the July 4th weekend!

Lhttp://www.lamborghinihouston.com/used-Houston-2011-Lamborghini-LP570+4+Performante-Base-ZHWGU8AJ2BLA10825

 

Sold! Sold! Sold!

 

Congrats - can't wait to see whats next in store for you.

 

Thanks!!! 2017 Turbo S in the HOUSE!