928
Sponsored by:

928 quitted while running

Old May 14, 2017 | 05:38 PM
  #1  
Juan Penabad's Avatar
Thread Starter
|
Registered User
Joined: May 2017
Posts: 1
From: Puerto Rico
Rep Power: 0
Juan Penabad is infamous around these parts
928 quitted while running

Hi.

this morning mi 1983 928 fired up and ran smoothly as usual, but after a couple of miles (still rather cold) it simply quitted.

I tried to start it over and while it cranked fine, it did'nt fire up. I took it home and have been looking inton t for a while. This is what I found so far.

I do have spark and ignition signal from the CPU but no fuel at the injectors. If I spray carburator cleaner through the intake plenum it starts alright....the fuel punp is acting (I can hear it, and I do have fuel pressure at the regulator and injectors rail.

I suspect it may have something to do with the CPU. (k jetronic, I believe).

any suggestions will be welcome

Juan
 


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -6. The time now is 01:14 PM.