Want to run the wiring for my V1 underneath the a-pillar and down to the fuse box next to the drivers left side.

It feels like it just pulls off...but don't want to break anything just in case there's another method.

Thanks in advance.

 

I ran my wire on the passenger side A pillar. I did not remove the pillar covering though -- I just used a plastic pry tool to jam the wiring into the pillar. Have not had any problems using this method thus far. Hope this helps.

 

Don't remove it unless you have to. I took it off my Cayenne and it never went back right, and I have taken many, many off. Something with the airbag I assume made the clips "hinge" instead of popping off. Do the same as PorscheCrazy and me, I just ran it down under the weather seal all the way down.

 

Thanks. How did you manage to fish the wire down to the fuse box?

 

I just wedged it under the a pillar cover at the top and flipped back the door weather strip and ran it down.