They were on my 993, but I replaced them for the original Cup wheels.

There is a very slight bend on the inside lip of one of the wheels (check out the third wheel in the second pic). The wheel still balances perfect. Other then that they are perfect with only 3k miles on them.

$1900

 

i always liked these wheels on the 993!

the offsets are a bit off. The front is sucked in by 7mm and the rear is pushed out by 7mm. i would assume that was fine as long as you run the stock tire sizes...

 

I've seen another 993 with these wheels and it looked great. However, it was lowered. I don't want to lower my car, and with the current stance they just don't look right.

Maybe slightly shorter tires would have done the trick. In the end, I just decided to go back to stock.

 

why don't you just get a 7mm spacer for the fronts. as for the rear, so long as you run 265's or a narrow 285 you'll be fine. if you run a wide 285 it will likely rub! that will make them look right. they really are a very nice wheel/tire.

btw, i have a spare set of MY02 wheels (original equipment) that i might be willing to part with. similar design but more detail.

 

I thought about it, but it just wasn't worth the expense. I already went back to the factory cup wheels for now. I might do the 18" turbo twists at some point.

 

Pics of them on??

 

if you go for the turbo twists then you should get hollow spoke technology wheels. You can tell them apart by the valve stem.

 

 

they look great on the car. better than they look on many other pcars...