what kind of crank hp/tq are we looking at ? 93 octane

 

Do you mean a UMW tune with straight K24's? Ask Kevin...

 

ya u forgot to add UMW tune .

 

woops
yea i meant with an UMW tune aswell

 

If you can swing it...think ZC....ask Kevin...

JB

 

steve email kevin he responds fast.

 

Steve:: You should be looking at around 530+hp to the wheels, with the addition of headers you should be at 550hp we have a client coming in next week who is installing this exact setup with a 5 bar frp, silicon Boost Hoses on the bottom end, custom fabbed ones up top along with RPM custom 66mm intake piping and one of our in house flashes. This is going to be one of our first documented in house 640R kits. Since you are local you are more then welcome to come by the shop to see the car, meet the techs, ect. This same client also requested a dyno be done on the car which you are also more then welcome to see or attend. Before you make a move hold out because I think this is going to make some great #'s

 

rpm
when can i come by ?

 

Your more then welcome to come by this weekend anytime, we can show you the entire kit out of the car, which we have in stock, go through numbers and details with you; however the client will not be dropping off his car until later in the week.

 

RPM
i already have the kit on the car though .
i was just curious as to the HP figures
maybe you guys can dyno it for me once it arrives ?

 

530 to the wheels is a touch optimistic, IMO...unless McLoving from your AV is driving it. Then 550 easy.

 

Don't want to hijack the thread but,

McLoving Superbad is the best

 

i thought 550 was a bit optimistic aswell
ill get it dynoed once it arrives..

 

We might be a little optimistic, we are the glass is half full type! however; the mods mentioned for the 550 were slightly different then what Steve has in his car. We should have dyno results in a few weeks and they will be posted along with a list of mods and some photos for you guys.

CAPTLST: if you start a new thread ill go line for line with you! haha

 

Those UMW K24 Superflow turbos sound cool.