60-130 times wiht proto intake & 20g's
HAHAHAHA You have to see my wifes collection!!
Registered User
Joined: Jan 2008
Posts: 360
From: Coral Springs, Florida
Rep Power: 60
start in 3erd at about 45-50 u should not spin at all, my car spins pretty bad in 2nd as well with my 18g setup. these are my times.
1 shift 6.08 60-130
2 shifts 6.5 60-130
Chris Green
1 shift 6.08 60-130
2 shifts 6.5 60-130
Chris Green
Registered User
Joined: Jan 2006
Posts: 5,710
From: MPLS, MN USA
Rep Power: 466
that is really a fantastic time for K24/18g's !!!
Your car must spool up very quickly.
Quick question; what intercoolers do you have on your car and
do you have the proto intakes in the fender wells?
Marty
Thread Starter
|
Registered User
Joined: Jun 2007
Posts: 935
From: USA
Rep Power: 91
... not only do i get wheel spin in second the car starts to go completely sideways... it s crazy my 18g's were never capable of that tim
Thread Starter
|
Registered User
Joined: Jun 2007
Posts: 935
From: USA
Rep Power: 91
this is my setup for my car.. this is not a guide for your vehicle
greedy profec
hi boost
set boost 82%
gain 10%
start boost 1.1 bar
warn 1.5 bar
pull 10%
last boost on
tim
Registered User
Joined: Jan 2007
Posts: 276
From: Los Angeles, SFV
Rep Power: 38
lsd
no, I have the engine out for rods, studs, porting, lsd and 30/76 turbos, I was planning on using the 24/20g turbos I have, but the engine build is taking so long that I ran into some more $$$ so I bought Scotts gt30/76 turbos on the forum. You are making me question the change. keep us posted.
Registered User
Joined: Jan 2008
Posts: 360
From: Coral Springs, Florida
Rep Power: 60
and also my turbo inlets pipes that all go to stock maf.
Chris Green
Tim get some tires man!
I hook up fine in 2nd and 3rd gear on 22-24psi as AWD. I run 19" 315 PS2's. Then again it is still 80* here in Houston so we will see how she acts in the 40* weather.
I hook up fine in 2nd and 3rd gear on 22-24psi as AWD. I run 19" 315 PS2's. Then again it is still 80* here in Houston so we will see how she acts in the 40* weather.
Registered User
Joined: Jan 2006
Posts: 5,710
From: MPLS, MN USA
Rep Power: 466
AWD traction
(the slippery dragstrip is a different matter entirely)
I run 19" PS2's also.
When it gets cold (below 50 degrees f, all bets are off and it gets squirrely!
)MK
Registered User
Joined: Jan 2006
Posts: 5,710
From: MPLS, MN USA
Rep Power: 466
Scott's Old turbos: Nice!
no, I have the engine out for rods, studs, porting, lsd and 30/76 turbos, I was planning on using the 24/20g turbos I have, but the engine build is taking so long that I ran into some more $$$ so I bought Scotts gt30/76 turbos on the forum. You are making me question the change. keep us posted.
Glad to see they are going to good use!!
MK
Registered User
Joined: Jan 2007
Posts: 276
From: Los Angeles, SFV
Rep Power: 38
Turbos
I hope they are worth the extra $$$$ over my 24/20g that have not been used. but with ported heads and race gas they should shine.