View Poll Results: Nice or Rice?
Voters: 131. You may not vote on this poll
POLL: My latest project - LEDs on a 996TT
#1
POLL: My latest project - LEDs on a 996TT
First off, let me preface this post with putting a disclaimer out there that I’m sure some of you guys will think this “mod” is dumb or “rice” and I have thought about that too… but I decided to go with it and do what has not been done before on a 996TT (albeit it’s a small mod J ) and experiment to see how it looks.
We all have seen the new audi’s (and even some of the new Porsches and TA Porsche) with the LED lights in the headlights/grill. Kind of like this
And of course on the new TA cayenne
I did some long and hard research and found that the “best and brightest” led’s with built in resistors are these ” Superflux 4 Chip LEDs”. These are pretty expensive each (compared to the $1.00 ones you see on ebay and others) but I have to say these are the brightest led’s that I have ever seen sold in the open market.
Here’s a comparison with the cheaper leds vs the superflux
While I had the bumper off, I experimented trying to find which slat on the radiator duct the lights will look good along an “oem” look.
Top slat
Middle slat
Lower slat
I actually like the look on the lower slat but I didn’t feel that the look of the lights in the daytime is “balanced” so I went with the middle slat.
Time to test the light…very bright
We all have seen the new audi’s (and even some of the new Porsches and TA Porsche) with the LED lights in the headlights/grill. Kind of like this
And of course on the new TA cayenne
I did some long and hard research and found that the “best and brightest” led’s with built in resistors are these ” Superflux 4 Chip LEDs”. These are pretty expensive each (compared to the $1.00 ones you see on ebay and others) but I have to say these are the brightest led’s that I have ever seen sold in the open market.
Here’s a comparison with the cheaper leds vs the superflux
While I had the bumper off, I experimented trying to find which slat on the radiator duct the lights will look good along an “oem” look.
Top slat
Middle slat
Lower slat
I actually like the look on the lower slat but I didn’t feel that the look of the lights in the daytime is “balanced” so I went with the middle slat.
Time to test the light…very bright
Last edited by M32; 12-30-2008 at 08:49 AM.
#3
Todd...working on it now Thanks for the heads up
Round 2:
The next thing I needed to do is mount it on the slat somehow. After visiting my local hardware store as well as hobby stores for ideas, I found a trash can with a “lip” that was perfect for the lights..
I started drilling holes and mounting the lights
After I was done, I had it cut out and trimmed to fit the slat
Here’s the car this morning
Lights off (the only thing that bothers me is you can see the yellow in the led. I might smoke it later to make it more discrete)
Lit up
Finally a video I did last night.
http://www.youtube.com/watch?v=tqvmygVlTkc
Comments/thoughts are always appreciated
Edwin
Round 2:
The next thing I needed to do is mount it on the slat somehow. After visiting my local hardware store as well as hobby stores for ideas, I found a trash can with a “lip” that was perfect for the lights..
I started drilling holes and mounting the lights
After I was done, I had it cut out and trimmed to fit the slat
Here’s the car this morning
Lights off (the only thing that bothers me is you can see the yellow in the led. I might smoke it later to make it more discrete)
Lit up
Finally a video I did last night.
http://www.youtube.com/watch?v=tqvmygVlTkc
Comments/thoughts are always appreciated
Edwin
Last edited by M32; 12-30-2008 at 08:50 AM.
#4
dying to see this edwin, been thinking of this for over a year but never found a shop competent enough to put the project in their hands
please post final pics up...the top ones dont work
please post final pics up...the top ones dont work
#6
Edwin
#7
Trending Topics
#15
Haha... thanks I had to do what I had to do!
Actually, it only shows up as one bar in pictures. This is a very good representation of what it looks when it's pitch black. You can definitely see the individual lights. Very hard to capture that on my cheap point-and-shoot camera
yeah... but that's where I got my inspiration from
Thanks for all the comments... please keep them coming
Edwin
yeah... but that's where I got my inspiration from
Thanks for all the comments... please keep them coming
Edwin