Project: Plenum, TB, Intake piping and fuel pump
Registered User
Joined: Nov 2007
Posts: 3,190
From: L.A.
Rep Power: 276
Now, let's get the story straight, was it Steve or Ben
We were supposed to get the aluminum back from the fabricator today but he needed more time to make it perfect. Looks like it's gonna be Monday or Tuesday at the soonest before we put her on the dyno again. IN the mean time, steve relocated the EBC to the 'batwing" area and ran the fuel pump lines.
Thread Starter
|
Registered User
Joined: Jul 2008
Posts: 5,301
From: Houston
Rep Power: 607
Update!
He really does Art. Steve is very detailed. The pipes have been fitted and the aluminum fab is complete. We added the 90 degree fitting for the vent (black) tube. Should be on the dyno tomorrow. See pics.
Close up of 90 degree fitting
With the engine out, you can see how the pipes work their way down to the turbos.
Very tight through here but enough clearance as to not rub.
A good shot of the plenum installed.
Close up of 90 degree fitting
With the engine out, you can see how the pipes work their way down to the turbos.
Very tight through here but enough clearance as to not rub.
A good shot of the plenum installed.
