996 Turbo LED Taillights- how can we get em made?
#106
Couple hundred is a pretty short order considering we have 20% of that since the list was created a week ago. As outlets for retail- there are 4 other active U.S. based porsche forums that I know of, ebay for the non-forum crowd, tuning shops (vivid, sharky, ect.) and retail shops (performance parts) that would probably buy a multiple sets to market, and then the ENTIRE rest of the world of Porsche owners.
Seems like a no-brainer to me. Hopefully they run with it.
Last edited by NOLA911; 10-14-2010 at 07:00 AM.
#107
#108
#109
Up ^
#110
how diff are the 997tt lights from the 996tt ones?
#111
I mentioned in a few other forums I'd be down.
1. David (ssmugen)
2. SaMas
3. Slider
4. stealthdriver
5. winnigt2
6. NOLA911
7. dzuperku
8. S4corrado996TT
9. ttpopo
10. unvmy996
11. r_matt_6
12. Freier
13. JSBear
14. RxPorsche
15. RobMD
16. bad107
17. unterbergamotte
18. vshugo996 (Vitor H.)
19. Fri996
20. weoco
21. ed
22. brain police (Patrick)
23. Twin_Turbo (Luis)
24. frankster
25. vv23
26. CABRIO C4
27. dfwerdoc
28. Big_Jay
29. Lennon31987 (vinny)
30. btapp
31. Shane
32. Zahntoid
33. PorscheTS
34. gt2rs
35. 997xpress
36. topgun
37. ggarza007
38. DYL 911
1. David (ssmugen)
2. SaMas
3. Slider
4. stealthdriver
5. winnigt2
6. NOLA911
7. dzuperku
8. S4corrado996TT
9. ttpopo
10. unvmy996
11. r_matt_6
12. Freier
13. JSBear
14. RxPorsche
15. RobMD
16. bad107
17. unterbergamotte
18. vshugo996 (Vitor H.)
19. Fri996
20. weoco
21. ed
22. brain police (Patrick)
23. Twin_Turbo (Luis)
24. frankster
25. vv23
26. CABRIO C4
27. dfwerdoc
28. Big_Jay
29. Lennon31987 (vinny)
30. btapp
31. Shane
32. Zahntoid
33. PorscheTS
34. gt2rs
35. 997xpress
36. topgun
37. ggarza007
38. DYL 911
#112
come on EVOMS you guys make everything? can you make a one off???
#113
1. David (ssmugen)
2. SaMas
3. Slider
4. stealthdriver
5. winnigt2
6. NOLA911
7. dzuperku
8. S4corrado996TT
9. ttpopo
10. unvmy996
11. r_matt_6
12. Freier
13. JSBear
14. RxPorsche
15. RobMD
16. bad107
17. unterbergamotte
18. vshugo996 (Vitor H.)
19. Fri996
20. weoco
21. ed
22. brain police (Patrick)
23. Twin_Turbo (Luis)
24. frankster
25. vv23
26. CABRIO C4
27. dfwerdoc
28. Big_Jay
29. Lennon31987 (vinny)
30. btapp
31. Shane
32. Zahntoid
33. PorscheTS
34. gt2rs
35. 997xpress
36. topgun
37. ggarza007
38. DYL 911[/QUOTE]
39. Jorgeassoc
Wondering how many pairs of LEDs we need to place. I am assuming that these will be ordered in China ? Maybe it will be a good idea to post up a thread on rennlist and organize some type of deposit so that these get produced accordingly.
I travel to China / Indonesia quite often and know we can prob get this knocked out in about 2-3 months (not including shipping).
The prototype will certainly have to be installed and checked for prelim issues.
Here is an example i came up w/.
ie: if $30,000 rmb (mold fee)
& 1 usd = 6.64 rmb
=4518 usd.
if 100 sets...
then it would be $45.18 per set for that mold fee.
if $60,000 mold then per set would be $90.36.
Obviously there needs to be 2 molds. One right light and One left. So double that to $180.72.
There are some other factors such a QC & R&D, but these shouldn't cost nearly as much as the initial mold fee.
Hope this helps, anymore questions let me know.
2. SaMas
3. Slider
4. stealthdriver
5. winnigt2
6. NOLA911
7. dzuperku
8. S4corrado996TT
9. ttpopo
10. unvmy996
11. r_matt_6
12. Freier
13. JSBear
14. RxPorsche
15. RobMD
16. bad107
17. unterbergamotte
18. vshugo996 (Vitor H.)
19. Fri996
20. weoco
21. ed
22. brain police (Patrick)
23. Twin_Turbo (Luis)
24. frankster
25. vv23
26. CABRIO C4
27. dfwerdoc
28. Big_Jay
29. Lennon31987 (vinny)
30. btapp
31. Shane
32. Zahntoid
33. PorscheTS
34. gt2rs
35. 997xpress
36. topgun
37. ggarza007
38. DYL 911[/QUOTE]
39. Jorgeassoc
Wondering how many pairs of LEDs we need to place. I am assuming that these will be ordered in China ? Maybe it will be a good idea to post up a thread on rennlist and organize some type of deposit so that these get produced accordingly.
I travel to China / Indonesia quite often and know we can prob get this knocked out in about 2-3 months (not including shipping).
The prototype will certainly have to be installed and checked for prelim issues.
Here is an example i came up w/.
ie: if $30,000 rmb (mold fee)
& 1 usd = 6.64 rmb
=4518 usd.
if 100 sets...
then it would be $45.18 per set for that mold fee.
if $60,000 mold then per set would be $90.36.
Obviously there needs to be 2 molds. One right light and One left. So double that to $180.72.
There are some other factors such a QC & R&D, but these shouldn't cost nearly as much as the initial mold fee.
Hope this helps, anymore questions let me know.
#114
I vote for Jorgeassoc to get this going! All in favor say "Aye!". Everyone NOT in favor say, "No!"
39. Jorgeassoc
Wondering how many pairs of LEDs we need to place. I am assuming that these will be ordered in China ? Maybe it will be a good idea to post up a thread on rennlist and organize some type of deposit so that these get produced accordingly.
I travel to China / Indonesia quite often and know we can prob get this knocked out in about 2-3 months (not including shipping).
The prototype will certainly have to be installed and checked for prelim issues.
Here is an example i came up w/.
ie: if $30,000 rmb (mold fee)
& 1 usd = 6.64 rmb
=4518 usd.
if 100 sets...
then it would be $45.18 per set for that mold fee.
if $60,000 mold then per set would be $90.36.
Obviously there needs to be 2 molds. One right light and One left. So double that to $180.72.
There are some other factors such a QC & R&D, but these shouldn't cost nearly as much as the initial mold fee.
Hope this helps, anymore questions let me know.[/QUOTE]
1. David (ssmugen)
2. SaMas
3. Slider
4. stealthdriver
5. winnigt2
6. NOLA911
7. dzuperku
8. S4corrado996TT
9. ttpopo
10. unvmy996
11. r_matt_6
12. Freier
13. JSBear
14. RxPorsche
15. RobMD
16. bad107
17. unterbergamotte
18. vshugo996 (Vitor H.)
19. Fri996
20. weoco
21. ed
22. brain police (Patrick)
23. Twin_Turbo (Luis)
24. frankster
25. vv23
26. CABRIO C4
27. dfwerdoc
28. Big_Jay
29. Lennon31987 (vinny)
30. btapp
31. Shane
32. Zahntoid
33. PorscheTS
34. gt2rs
35. 997xpress
36. topgun
37. ggarza007
38. DYL 911
2. SaMas
3. Slider
4. stealthdriver
5. winnigt2
6. NOLA911
7. dzuperku
8. S4corrado996TT
9. ttpopo
10. unvmy996
11. r_matt_6
12. Freier
13. JSBear
14. RxPorsche
15. RobMD
16. bad107
17. unterbergamotte
18. vshugo996 (Vitor H.)
19. Fri996
20. weoco
21. ed
22. brain police (Patrick)
23. Twin_Turbo (Luis)
24. frankster
25. vv23
26. CABRIO C4
27. dfwerdoc
28. Big_Jay
29. Lennon31987 (vinny)
30. btapp
31. Shane
32. Zahntoid
33. PorscheTS
34. gt2rs
35. 997xpress
36. topgun
37. ggarza007
38. DYL 911
Wondering how many pairs of LEDs we need to place. I am assuming that these will be ordered in China ? Maybe it will be a good idea to post up a thread on rennlist and organize some type of deposit so that these get produced accordingly.
I travel to China / Indonesia quite often and know we can prob get this knocked out in about 2-3 months (not including shipping).
The prototype will certainly have to be installed and checked for prelim issues.
Here is an example i came up w/.
ie: if $30,000 rmb (mold fee)
& 1 usd = 6.64 rmb
=4518 usd.
if 100 sets...
then it would be $45.18 per set for that mold fee.
if $60,000 mold then per set would be $90.36.
Obviously there needs to be 2 molds. One right light and One left. So double that to $180.72.
There are some other factors such a QC & R&D, but these shouldn't cost nearly as much as the initial mold fee.
Hope this helps, anymore questions let me know.[/QUOTE]
#115
To be honest, I would need a set that looked better than those that are being made for the 997. I'd be happy to pay $1K for something that looked close to the OEM light. On the side by side shots, though, the aftermarkets clearly look "aftermarket" when the lights are on. (for lack of a better word) They look great when the lights are off, though.
https://www.6speedonline.com/forums/...group-buy.html
https://www.6speedonline.com/forums/...group-buy.html
#116
ok , no tail lights for you.. lol
#117
Well, there was many more than 39. I'm in for sure,
here is a thread that I did with a poll and it had over 100 people
https://www.6speedonline.com/forums/...-interest.html
here is a thread that I did with a poll and it had over 100 people
https://www.6speedonline.com/forums/...-interest.html
#118
I am in.
1. David (ssmugen)
2. SaMas
3. Slider
4. stealthdriver
5. winnigt2
6. NOLA911
7. dzuperku
8. S4corrado996TT
9. ttpopo
10. unvmy996
11. r_matt_6
12. Freier
13. JSBear
14. RxPorsche
15. RobMD
16. bad107
17. unterbergamotte
18. vshugo996 (Vitor H.)
19. Fri996
20. weoco
21. ed
22. brain police (Patrick)
23. Twin_Turbo (Luis)
24. frankster
25. vv23
26. CABRIO C4
27. dfwerdoc
28. Big_Jay
29. Lennon31987 (vinny)
30. btapp
31. Shane
32. Zahntoid
33. PorscheTS
34. gt2rs
35. 997xpress
36. topgun
37. ggarza007
38. DYL 911[/quote]
39. Jorgeassoc
40. Z4MET (Shawn)
1. David (ssmugen)
2. SaMas
3. Slider
4. stealthdriver
5. winnigt2
6. NOLA911
7. dzuperku
8. S4corrado996TT
9. ttpopo
10. unvmy996
11. r_matt_6
12. Freier
13. JSBear
14. RxPorsche
15. RobMD
16. bad107
17. unterbergamotte
18. vshugo996 (Vitor H.)
19. Fri996
20. weoco
21. ed
22. brain police (Patrick)
23. Twin_Turbo (Luis)
24. frankster
25. vv23
26. CABRIO C4
27. dfwerdoc
28. Big_Jay
29. Lennon31987 (vinny)
30. btapp
31. Shane
32. Zahntoid
33. PorscheTS
34. gt2rs
35. 997xpress
36. topgun
37. ggarza007
38. DYL 911[/quote]
39. Jorgeassoc
40. Z4MET (Shawn)
#119
I probably won't buy them but I'm interested. So put my name on the list.
#120
This list is for serious buyers only! I say that we forty ante up and get this thing rolling. I dare say that we can all contribute to make 200, then sell the rest and make some money!
Any lawyers in here to draw up an agreement? If we each put up some extra $$$$, we can get our LEDs made NOW, then recoup our investment over time - as everybody gets to see how awesome they look (minus Seth).
I gotta admit, you guys really impressed me and all stepped up. I think we have a chance to really do something special here...
Any lawyers in here to draw up an agreement? If we each put up some extra $$$$, we can get our LEDs made NOW, then recoup our investment over time - as everybody gets to see how awesome they look (minus Seth).
I gotta admit, you guys really impressed me and all stepped up. I think we have a chance to really do something special here...