Wondering, if anyone sells these or can install these for a GT2 LSD.

 

Yes. BMC & G, Gbox, and TRG to name a few. Will you be shipping the lsd or do you need the unit to be removed?

 

No the unit is already out of the car, but will need to install it in place of the std open diff. This LSD is basically brand new out of a babied 500 mile GT2. So there is nothing wrong with it now.

 

Is it going back into the same car?

 

no, it's going in a different car.

 

I don't think you will need to re shim the lay shaft as its the same ring gear and pinion shaft, but I would check the backlash for proper contact. There are shims that locate the diff between the bearings they are cheap but the bearing on the ring gear side is a major PIA.. You will most likely wreck it trying to dial the shims in. Last time I honed out the old bearing just enough that it would side on and off with little effort. I think Gbox is in your state though or if you can nail down Brian that would be your best bet. Even the dealer may do it for you.