My next diy project... Replacing calipers seals and dust boots and installing puck holders. Any advice from the gurus??

 

related question. are the puck holders supposed to move? i had a few that seemed solid and others that moved freely during a recent brake job

 

If you track your car than don't waste your time with the piston dust boots. They crack and begin to disintegrate within a couple of track days. I changed them out once and shortly thereafter they were falling apart again. The puck holders are a good idea on the PCCB caliper w/ zircon inserts as they generally come loose from the heat. Should be a non issue on the normal red calipers.