I would like to disable clutch safety switch. Ordering RSS Clutch Stop.

If you have a picture, or diagram where/how to disconnect clutch/switch- I want to start the car without depressing the clutch pedal - I've done this to previous manual cars I owned, - will that throw CE light? or bad for accumulator?
DD with light flywheel is just pain in the a$$

 

I too would like to know! Good question.

 

It's pretty easy!! Just take the connector out from the switch that sits in front of the clutch pedal and connect the two wires together!

You should do the spring removal mod too while you're in there. I'm sure someone has a pic of this lying around they can post up.

 

Post #35....
http://rennlist.com/forums/996-turbo...45-00-a-3.html

Credit goes to 993GT/Rob for the photo.

 

Allright. Thanks guys. Looks like im going to play mcgyver role over the weekend and look into spring mod as well.

 

Check out the adjustable clutch stop from RSS too. I am using a 4 puck disc and it is really more street friendly, without all that pedal travel.

 

Thanks guys!

 

yep, thats what I would like to order. I dont think they have them in stock.
pedal travel killing me, and I dont wanna rev before take offs.

 

thanks!

 

THANKS! I grabbed the pic!

 

thanks mate!
really easy job guys, was my 1st mod(first day of ownership)
remember there is issue regarding safety/liability involved with this mod...do at your own discretion
Cheers,

 

^^^This! Don't leave in gear and start the car!!!!

 

On my 987.1 Boxster I installed a kill switch at that location after pulling the clutch switch connections and plan to do the same on the 996 turbo. If the switch is toggled off a thief (or wife/girlfriend) can't start the car.

 

Great idea!!!


I my case the take travel was so short I did not need the bolt.

 

The Pep Boys toggle switch I used is #84880