Hey Guys,
I recently purchase a set of used Twists from Oak (thanks Oak!) and was wondering if I need to use different bolts to mount them up. Currently I have Techart 19's with what looks to be a 10mm spacer in the rear and no spacer in the front.

Question: Can I reuse the same bolts and spacers for my twists?

I have a track event coming up at the end of the month and want to make sure I have the nessecary hardware for my wheels by then.

Thanks in advance!

 

Some space out OE hollows as much as 14mm all around.........so 10 in the back would be 'OK' & give you an offset of 35.
No spacer in front would be wimpy (just my opin).
I don't know what Techart bolts look like....but OE bolts are 45mm.

 

do the rear bolts look different than the front? Techart wheel uses the same bolt as stock but if u have 10mm spacer then the bolts should be longer. u don't need to use spacer for the twists if they're just for track event.

 

If you do use spacers for track events......they will look like this