Special thread to porsch3 / Kurt (4 every1 as well)
Special thread to porsch3 / Kurt (4 every1 as well)
Ok, now the wing is on your old baby and she's just shipped away, think she's seen the US for last time in her life. She wont miss the roads over here thogh, hate them with 30 profile tires.
But anyway, here are some pics.
Have one question btw. How do I get rid of the red lamp that turns on? (the aut. wing light), there's also comming up a messege in the display about it. How do I get rid of those things?



What do you think about it guys?
P.s. here's even an old pic so you can compare 'n tell me what you think is best..
But anyway, here are some pics.
Have one question btw. How do I get rid of the red lamp that turns on? (the aut. wing light), there's also comming up a messege in the display about it. How do I get rid of those things?



What do you think about it guys?
P.s. here's even an old pic so you can compare 'n tell me what you think is best..
Hey- Way to go!! I'm glad you completed the GT3 kit with the wing - looks awesome!
Now just get some 19's on there and you'll be all set. Those stock wheels are nice but just don't have enough snap to go with the GT3 body parts.
For the light, you can do one of three things:
1. just have the check light cleared at dealer
2. jump two pins in the wiring harness to resolve the check light issue
3. Buy a GT3 wiring harness from Porsche dealer- Try Sunset Porsche in Oregon, it is about $140
I think I emailed you the wiring schematic for jumping the pins- Let me know and I can resend it.
Take care and happy driving!!
Now just get some 19's on there and you'll be all set. Those stock wheels are nice but just don't have enough snap to go with the GT3 body parts.
For the light, you can do one of three things:
1. just have the check light cleared at dealer
2. jump two pins in the wiring harness to resolve the check light issue
3. Buy a GT3 wiring harness from Porsche dealer- Try Sunset Porsche in Oregon, it is about $140
I think I emailed you the wiring schematic for jumping the pins- Let me know and I can resend it.
Take care and happy driving!!
Hereis the MY02 wiring schematic- Jump pins A2 and A5 together at the wiring harness connector located to inner right side of engine area. The connector plug is fastened to the inner fender wall so you'll have to pop it off and pull it forward slightly, a flashlight is recommended. Use a piece of stiff thin wire cut from a cheap resistor, slide wire in next to pins A2 and A5 on outside of harness, tape or use a zip tie to hold. If questions ask Loren at renntech- this is where I got the info and I have not yet done it myself, but it looks pretty simple.
Last edited by p0rsch3; Jul 27, 2008 at 12:02 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
VW Vendor Classifieds
1
Sep 11, 2015 02:47 PM
PelicanParts.com
930 Turbo Vendor Classifieds
1
Sep 11, 2015 12:50 PM
PelicanParts.com
Audi Vendor Classifieds
1
Sep 9, 2015 03:28 PM
PelicanParts.com
Mercedes/AMG Vendor Classifieds
0
Sep 3, 2015 03:51 PM
PelicanParts.com
BMW Vendor Classifieds
0
Sep 3, 2015 03:50 PM




GL with everything...
