double din installation costs?
I just read my box and it says compatible with both the Ipod and Iphone so it should work.
I no longer have mine, but I thought it was on the faceplate, CR 223 I believe. Also, the amp was on the right side of the tire when facing my car.
Not to hijack, but I went with the DN6960 and am delighted with it. The only problem I have is that it doesn't automatically recognize my Iphone when I get in the car. Sometime it does and sometimes it doesn't and I don't know how to tell if it does?
Not to hijack, but I went with the DN6960 and am delighted with it. The only problem I have is that it doesn't automatically recognize my Iphone when I get in the car. Sometime it does and sometimes it doesn't and I don't know how to tell if it does?
Ok. I checked left and right and saw no amp. Is it possible that some cars with the most basic stereo have no external amp??
I no longer have mine, but I thought it was on the faceplate, CR 223 I believe. Also, the amp was on the right side of the tire when facing my car.
Not to hijack, but I went with the DN6960 and am delighted with it. The only problem I have is that it doesn't automatically recognize my Iphone when I get in the car. Sometime it does and sometimes it doesn't and I don't know how to tell if it does?
Not to hijack, but I went with the DN6960 and am delighted with it. The only problem I have is that it doesn't automatically recognize my Iphone when I get in the car. Sometime it does and sometimes it doesn't and I don't know how to tell if it does?
I checked left and right and saw no amp. Is it possible that some cars with the most basic stereo have no external amp??
Your speaker wires should be connected to the headunit.
Yes, the non-Bose system should not have an amp. I think you're in better shape to upgrade your system. I have the Bose system and will require running more wires. I also have to get rid of the headunit and amp at the same time.
Your speaker wires should be connected to the headunit.
Your speaker wires should be connected to the headunit.
jeneric996: I have the CDR-23 head unit in my car though which is the same one that the bose amp uses right? So where would the power for my speakers come from? Also I see you are in so cal like me, do you know any good stereo shops that are trustworthy to do a good install for a good price?
Car audio innovations in SoCal has a lot of experience with Porsches and a great reputation.
http://www.caraudioinnovations.com/
http://www.caraudioinnovations.com/
delirium: I highly recommend installer Mike Mukai. I have worked with him back at CarMate in Glendale in the mid-90's. He has moved a few times from Sprewell in San Gabriel to now, I believe, Auto Sound Innovation in Studio City, CA. I don't know the place, but he is great. Give him a call and see if he is there. Inquire and mention "Eric from Carmate" recommended him.
My Bose amp recently died again, but this time out of warranty. I'm thinking about upgrading the entire system with an aftermarket set up because those amps cost about $650 for reman or $850 for new.
I checked out the CDR-23 headunit and it should have built-in power that is supplied to the speakers for non-Bose systems. However, I could be incorrect because I have not fully researched your set up. The connectors from the molex plug to the headunit have speaker connections too. I assume they are used for non-Bose systems like yours. With my set up, the speaker wires connect to the amp in the trunk.
My Bose amp recently died again, but this time out of warranty. I'm thinking about upgrading the entire system with an aftermarket set up because those amps cost about $650 for reman or $850 for new.
I checked out the CDR-23 headunit and it should have built-in power that is supplied to the speakers for non-Bose systems. However, I could be incorrect because I have not fully researched your set up. The connectors from the molex plug to the headunit have speaker connections too. I assume they are used for non-Bose systems like yours. With my set up, the speaker wires connect to the amp in the trunk.
Last edited by jeneric996; Mar 24, 2011 at 09:12 PM.
I found the background image on google images. I just searched for Porsche splash screen, and several images came up. I downloaded three of them, and ended up choosing this one.
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
VW Vendor Classifieds
0
Aug 21, 2015 04:23 PM
PelicanParts.com
Mercedes/AMG Vendor Classifieds
0
Aug 21, 2015 01:37 PM
PelicanParts.com
Audi Vendor Classifieds
0
Aug 21, 2015 01:28 PM





