996 Previous model naturally aspirated Porsche 911 community. Discuss C2, C2s, C4, C4s, Targa and Cabriolets.

creeking front end

Thread Tools
 
Rate Thread
 
Old Nov 18, 2015 | 08:58 AM
  #1  
bobecke's Avatar
Thread Starter
|
Registered User
Joined: Mar 2014
Posts: 4
From: san rafael, ca.
Rep Power: 0
bobecke is infamous around these parts
Angry creeking front end

Hi guys. I have a creeking noise in the front end which only happens when it gets hot. I can feel it slightly in the wheel. I have replaced shocks, mounts lower control arms, tie rods and ends, drop links, and lubed the sway bar bushings. When the car is cold and for 15-20 minutes, it will be nice and quiet but once it gets hot or if I park it outside on a hot day it starts up again. Sounds like rubber/metal or a bushing but I can feel it in the wheel. Mechanics are hands up. Car is 99 C2 with 50K on it. Any help out there??


Thanks!
 
Old Dec 11, 2015 | 06:07 PM
  #2  
masterofpuppets's Avatar
Registered User
Joined: Feb 2015
Posts: 9
Rep Power: 0
masterofpuppets is infamous around these parts
Mine does the same thing and did it before and after I fitted new coil overs so I know it's not them. My car is running the original coffin arms etc so I planned to replace those as I expect it's them creaking.
 
Old Dec 12, 2015 | 09:04 AM
  #3  
Chi-town's Avatar
Registered User
Joined: Nov 2015
Posts: 26
From: Disneyland, CA
Rep Power: 12
Chi-town is infamous around these parts
When you replaced the arms and other suspension components was the suspension loaded when the bolts were tightened or was it hanging?
 
Old Dec 12, 2015 | 05:02 PM
  #4  
masterofpuppets's Avatar
Registered User
Joined: Feb 2015
Posts: 9
Rep Power: 0
masterofpuppets is infamous around these parts
Hi Chi-town,

Yeah the suspension was hanging as I did the job on axle stands
 
Old Dec 12, 2015 | 05:05 PM
  #5  
Chi-town's Avatar
Registered User
Joined: Nov 2015
Posts: 26
From: Disneyland, CA
Rep Power: 12
Chi-town is infamous around these parts
Try and loosen the bolts and re-tighten them with the suspension loaded. I've seen suspension noises when tightened when unloaded.
 
Old Dec 12, 2015 | 05:12 PM
  #6  
masterofpuppets's Avatar
Registered User
Joined: Feb 2015
Posts: 9
Rep Power: 0
masterofpuppets is infamous around these parts
Originally Posted by Chi-town
Try and loosen the bolts and re-tighten them with the suspension loaded. I've seen suspension noises when tightened when unloaded.
I need to correct the rear camber on mine so will be ordering the Elephant Racing adjustable rear arms in the new year. Will buy as set of axle stands and try tightening it up loaded up. Thanks mate
 
Old Dec 23, 2015 | 04:05 PM
  #7  
kpl's Avatar
kpl
Registered User
Joined: May 2008
Posts: 76
Rep Power: 22
kpl is infamous around these parts
I have replaced shocks, mounts lower control arms,
were the strut tower mounts replaced?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MadWhip
996 Turbo / GT2
14
Feb 11, 2016 10:29 PM
paycer
Automotive Parts & Accessories For Sale/Wanted
2
Dec 4, 2015 12:18 PM
Q8-996turboS
996 Turbo / GT2
7
Oct 20, 2015 04:52 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -6. The time now is 03:47 PM.