VR700ish Build - Motons, Milltek, Agency Power, New VTG Turbos
Registered User
Joined: Jan 2009
Posts: 760
From: Austin, TX
Rep Power: 76
Man,
This car is just plain AWSOME!
It handles great, sounds great, performs great. I will be posting my own impressions and complete review when i am done with everything on it.
Thanks Dan...
This car is just plain AWSOME!
It handles great, sounds great, performs great. I will be posting my own impressions and complete review when i am done with everything on it.
Thanks Dan...
Just for fun...
Man,
This car is just plain AWSOME!
It handles great, sounds great, performs great. I will be posting my own impressions and complete review when i am done with everything on it.
Thanks Dan...
This car is just plain AWSOME!
It handles great, sounds great, performs great. I will be posting my own impressions and complete review when i am done with everything on it.
Thanks Dan...
Another one of my favorites
Dan,
Your team does a great job, you got my car set up right, i am very glad with the results. I will work on tuning my Motons in the next couple of weeks, i am just looking forward to raping the streets in Austin with new added ponies... it felt very good when i got on it this afternoon.
I got the tuning i asked for, the suspension i asked for, all the other boltons. I will be bringing you my C6 in a few weeks, The drive was well worth it, thank you again.
Your team does a great job, you got my car set up right, i am very glad with the results. I will work on tuning my Motons in the next couple of weeks, i am just looking forward to raping the streets in Austin with new added ponies... it felt very good when i got on it this afternoon.
I got the tuning i asked for, the suspension i asked for, all the other boltons. I will be bringing you my C6 in a few weeks, The drive was well worth it, thank you again.
Registered User
Joined: Jan 2009
Posts: 760
From: Austin, TX
Rep Power: 76
The worst kit i have installed. of course after really driving the car... 
Dan, I have to hand it to you, I honestly thought you were a bit smarter than this. I will gladly put copies of receipts, comments from mechanics, pictures of the damages and data logs on this very beautiful forum and have everyone take a good look at you. If you weren't just desperate for attention you would not go to the extent of reviving this thread. But good JOB!!
and Dan, You are welcome
Dan, I have to hand it to you, I honestly thought you were a bit smarter than this. I will gladly put copies of receipts, comments from mechanics, pictures of the damages and data logs on this very beautiful forum and have everyone take a good look at you. If you weren't just desperate for attention you would not go to the extent of reviving this thread. But good JOB!! and Dan, You are welcome
Last edited by KA 997TT; Sep 9, 2009 at 10:16 AM.
Post it all day long. Show the pictures of damages. Cause your entire installation was documented here and there is NO DAMAGE - http://www.vividracing.com/forums/ga...?c=341&userid=. Read your quotes, cause all was good. You seem to forget all the extra work I did for you including giving you 90 day payments to help you out. What about all the late calls on my cell phone to help you out. If your state of mind makes you take everything apart 5 times, that is out of my control. You had a dealership $10 mechanic working on your car. Post receipts, that is all your bad for taking it there and have the "stealership" bill you. I have datalogs showing your tune was fine. I have emails out the whaaazzoooo.
I am posting this as I am human. And you have no right to indirectly bash or attack people. Tell me that you are going to fly and kick Softronic *** and you will put this company and that company out of business. You cant. Personally I dont want your business. Oh and your welcome for the $2500 refund too that I did to make you happy.
So for all reading this, here is what I told Kino I would do for him, and he stubbornly neglected... Now I shared my piece of mind.
> 1 - I send you the durametric cable. You datalog the timing, email to
> Scott. He will then review it. If a change needs to be made, you can flash
> the car. However, this is/might going to be related to ignition timing and
> this can be caused by gas/octane issues. You said the car has only driven
> 200miles since June. Is it possible the gas is bad? Have you added some
> octane booster to the car or race gas to the car to see if the "blip" goes
> away? That will be the fastests, quickest diagnosis of timing for any
> turbocharged vehicle.
>
> 2 - I will send a truck to pick up the car. It ships to me, we go through
> the entire car mechanically. Dyno it, drive it, test it. Make sure it is
> corrected. Then you can fly out here and either drive it back or we ship it
> back. 2-3 days tops.
>
> 3 - You can get another tune done. I know the new local GIAC dealer and he
> can request a file for your mods, though again, not sure if this is a fix.
> Or you can contact Todd at Protomotive as he is in Arkansas, but I doubt it
> would be different. If you choose to get another flash done and the problem
> is corrected, then I will have to refund you for the flash.
>
> My end goal is to take care of you. So YOU let me know what you would like
> to do. This is my priority.
I am posting this as I am human. And you have no right to indirectly bash or attack people. Tell me that you are going to fly and kick Softronic *** and you will put this company and that company out of business. You cant. Personally I dont want your business. Oh and your welcome for the $2500 refund too that I did to make you happy.
So for all reading this, here is what I told Kino I would do for him, and he stubbornly neglected... Now I shared my piece of mind.
> 1 - I send you the durametric cable. You datalog the timing, email to
> Scott. He will then review it. If a change needs to be made, you can flash
> the car. However, this is/might going to be related to ignition timing and
> this can be caused by gas/octane issues. You said the car has only driven
> 200miles since June. Is it possible the gas is bad? Have you added some
> octane booster to the car or race gas to the car to see if the "blip" goes
> away? That will be the fastests, quickest diagnosis of timing for any
> turbocharged vehicle.
>
> 2 - I will send a truck to pick up the car. It ships to me, we go through
> the entire car mechanically. Dyno it, drive it, test it. Make sure it is
> corrected. Then you can fly out here and either drive it back or we ship it
> back. 2-3 days tops.
>
> 3 - You can get another tune done. I know the new local GIAC dealer and he
> can request a file for your mods, though again, not sure if this is a fix.
> Or you can contact Todd at Protomotive as he is in Arkansas, but I doubt it
> would be different. If you choose to get another flash done and the problem
> is corrected, then I will have to refund you for the flash.
>
> My end goal is to take care of you. So YOU let me know what you would like
> to do. This is my priority.
Registered User
Joined: Jan 2009
Posts: 760
From: Austin, TX
Rep Power: 76
Post it all day long. Show the pictures of damages. Cause your entire installation was documented here and there is NO DAMAGE - http://www.vividracing.com/forums/ga...?c=341&userid=. Read your quotes, cause all was good. You seem to forget all the extra work I did for you including giving you 90 day payments to help you out. What about all the late calls on my cell phone to help you out. If your state of mind makes you take everything apart 5 times, that is out of my control. You had a dealership $10 mechanic working on your car. Post receipts, that is all your bad for taking it there and have the "stealership" bill you. I have datalogs showing your tune was fine. I have emails out the whaaazzoooo.
I am posting this as I am human. And you have no right to indirectly bash or attack people. Tell me that you are going to fly and kick Softronic *** and you will put this company and that company out of business. You cant. Personally I dont want your business. Oh and your welcome for the $2500 refund too that I did to make you happy.
So for all reading this, here is what I told Kino I would do for him, and he stubbornly neglected... Now I shared my piece of mind.
> 1 - I send you the durametric cable. You datalog the timing, email to
> Scott. He will then review it. If a change needs to be made, you can flash
> the car. However, this is/might going to be related to ignition timing and
> this can be caused by gas/octane issues. You said the car has only driven
> 200miles since June. Is it possible the gas is bad? Have you added some
> octane booster to the car or race gas to the car to see if the "blip" goes
> away? That will be the fastests, quickest diagnosis of timing for any
> turbocharged vehicle.
>
> 2 - I will send a truck to pick up the car. It ships to me, we go through
> the entire car mechanically. Dyno it, drive it, test it. Make sure it is
> corrected. Then you can fly out here and either drive it back or we ship it
> back. 2-3 days tops.
>
> 3 - You can get another tune done. I know the new local GIAC dealer and he
> can request a file for your mods, though again, not sure if this is a fix.
> Or you can contact Todd at Protomotive as he is in Arkansas, but I doubt it
> would be different. If you choose to get another flash done and the problem
> is corrected, then I will have to refund you for the flash.
>
> My end goal is to take care of you. So YOU let me know what you would like
> to do. This is my priority.
I am posting this as I am human. And you have no right to indirectly bash or attack people. Tell me that you are going to fly and kick Softronic *** and you will put this company and that company out of business. You cant. Personally I dont want your business. Oh and your welcome for the $2500 refund too that I did to make you happy.
So for all reading this, here is what I told Kino I would do for him, and he stubbornly neglected... Now I shared my piece of mind.
> 1 - I send you the durametric cable. You datalog the timing, email to
> Scott. He will then review it. If a change needs to be made, you can flash
> the car. However, this is/might going to be related to ignition timing and
> this can be caused by gas/octane issues. You said the car has only driven
> 200miles since June. Is it possible the gas is bad? Have you added some
> octane booster to the car or race gas to the car to see if the "blip" goes
> away? That will be the fastests, quickest diagnosis of timing for any
> turbocharged vehicle.
>
> 2 - I will send a truck to pick up the car. It ships to me, we go through
> the entire car mechanically. Dyno it, drive it, test it. Make sure it is
> corrected. Then you can fly out here and either drive it back or we ship it
> back. 2-3 days tops.
>
> 3 - You can get another tune done. I know the new local GIAC dealer and he
> can request a file for your mods, though again, not sure if this is a fix.
> Or you can contact Todd at Protomotive as he is in Arkansas, but I doubt it
> would be different. If you choose to get another flash done and the problem
> is corrected, then I will have to refund you for the flash.
>
> My end goal is to take care of you. So YOU let me know what you would like
> to do. This is my priority.
This is my last request of asking you to stop harassing me. I would not mind have one of my clients in Mesa give you a call and maybe explain to you what i am asking. You need to understand that I did have a terrible experience with you. I do not want to you to have my car after the damages you caused to let you "repair it" I do not want your opinion, I did not bash you or your products.
Thank you for your discounts and answering my calls but NOT for messing up my car.
I will not be as childish as you are and post a huge thread "My experience with Vivid Racing" post pics, videos, receipts and the rest of the emails that have information outside of me being nice and ay a couple of nice words towards you online as a thank you for a good deal.
Again,
You are welcome.
This is my thread, no harassment. When a car leaves here fine and a customer messes it up, all we can do is help fix it. I am defending my company, my products, and my reputation to your banter.
Have one of your clients call me.
Have one of your clients call me.
Thread
Thread Starter
Forum
Replies
Last Post
